Lexus UX 250h 2020 Owner's Manual page 306

304
5-6. Using the other interior features
USB charging ports
The USB charging ports are used to
supply 2.1 A of electricity at 5 V to
external devices.
The USB charging ports are for
charging only. They are not designed
for data transfer or other purposes.
Depending on the external device, it
may not charge properly. Refer to the
manual included with the device
before using a USB charging port.
Using the USB charging ports
■
Open the lid.
The USB charging ports can be used
■
when
The power switch is in ACC or ON.
Situations in which the USB charging
■
ports may not operate correctly
● If a device which consumes more than 2.1
A at 5 V is connected
If a device designed to communicate with
●
a personal computer, such as a USB
memory device, is connected
If the connected external device is turned
●
off (depending on device)
● If the temperature inside the vehicle is
high, such as after the vehicle has been
parked in the sun
About connected external devices
■
Depending on the connected external
device, charging may occasionally be sus-
pended and then start again. This is not a
malfunction.
NOTICE
To prevent damage to the USB
■
charging ports
● Do not insert foreign objects into the
ports.
● Do not spill water or other liquids into
the ports.
● When the USB charging ports are not
in use, close the lids. If a foreign object
or liquid enters a port may cause a
short circuit.
Do not apply excessive force to or
●
impact the USB charging ports.
● Do not disassemble or modify the USB
charging ports.
To prevent damage to external
■
devices
● Do not leave external devices in the
vehicle. The temperature inside the
vehicle may become high, resulting in
damage to an external device.
● Do not push down on or apply unnec-
essary force to an external device or
the cable of an external device while it
is connected.
To prevent 12-volt battery discharge
■
Do not use the USB charging ports for a
long period of time with the hybrid sys-
tem stopped.
Wireless charger (if equipped)
A portable device, such as a smart-
phone or mobile battery, can be
charged by just placing it on the
charging area, provided the device is
compatible with the Qi wireless
charging standard created by the
Wireless Power Consortium.