Lexus UX 250h 2020 Owner's Manual page 55

accordance to the operation manual
enclosed with the child restraint sys-
tem.
1 If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head
restraint.
With flexible lower attachments

2
Remove the anchorage covers, and
latch the hooks of the lower attach-
ments onto the LATCH anchors.
For owners in Canada:
The symbol on a child restraint system indi-
cates A the presence of a lower connec-
tor system.
1-2. Child safety
With rigid lower attachments

2
Remove the anchorage covers, and
latch the buckles onto the LATCH
anchors.
For owners in Canada:
The symbol on a child restraint system indi-
cates A the presence of a lower connec-
tor system.
3 If the child restraint has a top tether
strap, follow the child restraint man-
ufacturer's operation manual
regarding the installation, using the
top tether strap to latch onto the
top tether strap anchor. (P.54)
4
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
When installing in the rear center seat
■
There are no LATCH anchors behind the
rear center seat. However, the inboard
LATCH anchors of the outboard seats,
which are 15.5 in. (396 mm) apart, can be
used if the child restraint system manufac-
turer's instructions permit use of those
anchors with the anchor spacing stated.
Child restraint systems with rigid lower
attachments cannot be installed in the cen-
ter seat. This type of child restraint system
53
1