Lexus UX 250h 2020 Owner's Manual page 31

hold the child restraint system (CRS) firmly.
To free the belt again, fully retract the belt
and then pull the belt out once more.
Adjusting the seat belt shoulder
anchor height (front seats)
1
Push the seat belt shoulder anchor
down while pressing the release
button .
A
2
Push the seat belt shoulder anchor
up.
Move the height adjuster up and down as
needed until you hear a click.
WARNING
Adjustable shoulder anchor
■
Always make sure the shoulder belt is
positioned across the center of your
shoulder. The belt should be kept away
from your neck, but not falling off your
shoulder. Failure to do so could reduce
the amount of protection in an accident
and cause death or serious injuries in the
event of a sudden stop, sudden swerve or
accident.
1-1. For safe use
Seat belt pretensioners (front
and outboard rear seats)
The pretensioners help the seat belts to
quickly restrain the occupants by
retracting the seat belts when the vehi-
cle is subjected to certain types of
severe frontal or side collision or a
vehicle rollover.
The pretensioners do not activate in the
event of a minor frontal impact, a minor
side impact or a rear impact.
■ Replacing the belt after the preten-
sioner has been activated
If the vehicle is involved in multiple colli-
sions, the pretensioner will activate for the
first collision, but will not activate for the
second or subsequent collisions.
29
1