Table of Contents
Advertisement
Quick guide for ANALOG MENU operation/Selecting the
video input source/On-screen Language Selection
Make sure the antenna connection
and power supply are connected
as per the description on previous
page.
Preparations:
•
Turn on the unit with the
button on the unit. The
Standby) indicator will light up in
green.
To change the unit to standby mode,
press
on the remote control.
(On/Timer/Standby) indicator will
change from green to red. To turn on
the unit from standby mode, press
on the remote control again.
In standby mode, you can also turn
the unit on with
on the unit or P + / – on the remote
control.
To turn off the unit press
button on the unit - to completely
switch it off, disconnect the mains
power supply.
Note:
•
If no buttons are pressed for more
than approx. 60 seconds, the MENU
disappears automatically.
12
51B0346B_ENG.indd 12
51B0346B_ENG.indd 12
Quick guide for ANALOG MENU operation
Call ANALOG MENU and for example: Select AUTO
TUNING.
1
2
(Power)
(On/Timer/
3
(Channel)
/
(Power)
4
Selecting the video input source
Press INPUT SELECT to view a signal
from another device connected to your
TV, such as a VCR or DVD player. You
can select each input source depending
on which input jacks you used to connect
your devices.
To select the video input source, press
/
. Then press ENTER within 6 seconds.
On-screen Language Selection
1
2
3
Press INPUT SELECT.
Select ATV. Press ANALOG MENU.
Press
or
to select
Press
or
to select AUTO
TUNING, then press ENTER to
enter the AUTO TUNING menu.
... on the following pages the MENU
can be called in the same way as
here.
Press EXIT to return to the normal screen.
Select LANGUAGE (unless you
have already selected when the set
was first switched on).
Then press ENTER.
Press
or
to select the desired language.
Press EXIT to return to the normal screen.
.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
INPUT SELECT
ATV
DTV
AV1
AV2
COMPONENT
HDMI
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
ENGLISH
6/13/08 10:07:25 AM
6/13/08 10:07:25 AM
Advertisement
Table of Contents
