Table of Contents
Advertisement
51B0346B_ENG.indd 35
51B0346B_ENG.indd 35
To pause playback (still mode)
Press
during playback.
To resume normal playback, press PLAY (
•
The sound is muted during still mode.
To stop playback
Press .
To remove the disc
Press
.
Remove the disc after the disc comes out.
Note:
•
If a non-compatible disc is loaded, "Incorrect Disc", "Region
Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your
disc again (see pages 33 and 51).
•
Some discs may take a minute or so to start playback.
•
When you set a single-faced disc label backwards (i.e.
the wrong way), "Reading" will appear on the display for a
few minutes and then "Incorrect Disc" will continue to be
displayed.
•
Some discs may not work the resuming facility.
•
Resuming cannot function when you play a PBC-featured
Video CD while the PBC is on. To turn off the PBC, see page
33.
•
Some playback operations of DVDs may be intentionally fixed
by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some
playback features may not be available. Also refer to the
instructions supplied with the DVDs.
•
Do not move the unit during playback. Doing so may damage
the disc.
•
In many instances, a menu screen will appear after playback
of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching
that image onto its screen. To avoid this, be sure to press
POWER (
) on your remote control once the movie is
completed.
•
There may be a slight delay between the button is pressed
and the function activates.
Playing a disc
).
6/13/08 10:07:42 AM
6/13/08 10:07:42 AM
35
Advertisement
Table of Contents
