Table of Contents
Advertisement
Parental
Menu
E.B.L.
DRC
: English
: Off
: Off
: Off
Password
TV Screen
QSound
Subtitle
: English
: On
: Change
: 4:3
Display
Audio
: English
: On
OSD
Picture Mode
: English
: Auto
JPEG Interval
: 5 Seconds
Screen Saver
: On
51B0346B_ENG.indd 51
51B0346B_ENG.indd 51
Customizing The Function Settings
Parental
Some discs are specified as not suitable for children. Such discs can be
limited not to playback with the unit.
1) Press
or
to select "Parental", then press ENTER. "Enter
Password" screen will appear.
2) Press "0000" using Number buttons (0–9). (Please note, this is pre-
setting password of this unit). Then press ENTER. The parental level list
will appear.
Level 1:
DVD software for adults cannot be played back.
Level 8:
Virtually all DVD software can be played back.
Level Off: The parental control setting does not function.
3) Press
or
to select from the level 1 to level 8. The limitation will be
more severe as the level number is lower. Then press ENTER.
4) Press
to activate Parental control setting.
Note:
•
If each setup (pages 49 ~ 51) has been completed, the unit can always
work under the same condition (especially with DVD discs).
Each setup will be retained in the memory even if you turn the power off.
•
Depending on the discs, the unit cannot limit playback.
•
Some discs may not be encoded with specific rating level information
though its disc jacket says "adult." For those discs, the age restriction will
not work.
•
The password is required every time when you change the parental
level.
•
If you input a wrong number, press CANCEL.
Password
1) Press
or
to select "Password", then press ENTER. "Enter
Current Password" screen will appear.
2) Press Number buttons (0–9) to input the current password (If the
password has not been set yet after you purchase this unit, it is "0000").
3) Then press ENTER. "Enter New Password" screen will appear. Press
Number buttons (0–9) to input the new password.
4) Press ENTER. Now your new password has been set. Be sure to
remember this number!
If you forget the password.
1) Press
to remove the disc.
2) While holding 7 down on the remote control and at the same time press
STOP (DVD) on the unit. "Password Clear" appears on the screen. Now
the password has been returned to the initial value ("0000").
51
6/13/08 10:07:58 AM
6/13/08 10:07:58 AM
Advertisement
Table of Contents
