Table of Contents
Advertisement
Customizing The Function Settings
Night Mode
E.B.L.
Menu
Parental
Subtitle
TV Screen
Set Password
Digital Out
Audio
Output
Display
Picture Mode
DivX(R) VOD
JPEG Interval
Screen Saver
50
51B0346B_ENG.indd 50
51B0346B_ENG.indd 50
Picture Mode
There are two types of source content in pictures recorded in DVD video
discs: film content (pictures recorded from films at 24 frames per second)
and video content (video signals recorded at 30 frames per second). Make
this selection according to the type of content being viewed.
Auto:
Select this selection normally.
The DVD player automatically detects source content, film
or video of playback source, and converts that signal in an
appropriate method.
Film:
The DVD player converts film content pictures appropriately.
Suitable for playback of film content pictures.
Video: The DVD player filters video signal, and converts it appropriately.
Suitable for playback of video content pictures.
Note:
•
Depending on the disc, pictures may be cut off or doubled. In this case,
select "Video".
JPEG Interval
You can continuously playback all JPEG files automatically.
After the selection below, the disc will start playback on JPEG files which
have been recorded.
Off:
5 Seconds:
10 Seconds: Plays back images in the form of a slide show at 10 second
15 Seconds: Plays back images in the form of a slide show in 15 second
Night Mode
Night Mode enables you to control the dynamic range so as to achieve a
suitable sound for your equipment.
Off: It plays back at the recording level on the disc.
On: Loud sound such as explosion is toned down slightly when played
back. This is suitable when it is connected to a stereo.
: English
: Off
: Off
: Off
Note:
: 4:3
: English
: PCM
•
This function works only when the disc recorded with Dolby Digital is
: English
: On
: Interlace
played back.
: Auto
•
The level of Night Mode may differ depending on DVD video disc.
: 5 Seconds
: On
Digital Out
You can select the digital output sound format corresponding to your
system connection.
Off:
PCM:
Bitstream: Disc audio bitstream data will be output.
Note:
•
Even if you select "Bitstream", MPEG Audio will be output in PCM
format.
Plays back one file at a time.
Plays back images in the form of a slide show at 5 second
intervals.
intervals.
intervals.
There is no sound output from DIGITAL AUDIO OUT jack.
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo
amplifier.
6/13/08 10:07:58 AM
6/13/08 10:07:58 AM
Advertisement
Table of Contents
