Table of Contents
Advertisement
Disc slot
4
5
6
7
8
9
10
Description of Indicators and Controls
1. Remote sensor
2.
(Standby/Timer/On) indicator: The LED indicator lights up red in standby mode, orange in
standby mode when the timer is activated, and green in the power ON mode.
3. Loudspeakers
4. EJECT: Eject a disc.
5.
(Volume) +/– buttons / In Menu: Setting.
6.
(Channel)
memory. DVD mode : Playback. In Menu: Setting. In Standby: Turning on the unit.
7.
(Channel)
memory. DVD mode : Stop. In Menu: Setting. In Standby: Turning on the unit.
8. MENU button: To display the menu screen.
9. TV/AV/PC/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC/DVD. In Menu :
Using as ENTER button.
10.
(Power)-key: Preparation: Connect power-cable to AC220~240V/50Hz.
a) If standy-LED is red, you may power-off. To power-off, press power-key 1x and release.
For confirmation, standby-LED will change to dark.
b) If standby-LED is off, you may power-on. To power-on, press power-key 1x and release.
For confirmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press power-key 1x and release to power-off.
For confirmation, standby-LED will change to dark.
In power-off-condition, the TV's power-consumption is approx. 1 Watt.
If total disconnection from the mains is required, pls unplug.
51B0346B_ENG.indd 7
51B0346B_ENG.indd 7
/PLAY (▶) button: Press
/STOP (■) button: Press
Location of controls
3
1 2
to change to a higher numbered channel set into
to change to a lower numbered channel set into
7
6/13/08 10:07:13 AM
6/13/08 10:07:13 AM
Advertisement
Table of Contents
