Table of Contents
Advertisement
7. Setting of Scart socket
1
In
, select AV1 OUTPUT, then press ENTER.
2
This determines whether the AV1 outputs the signal from the internal
tuner or whatever input is shown on the screen.
Press
or
TV:
Outputs the last channel position selected.
MONITOR: The picture displayed on TV-screen
3
Press EXIT to return to the normal screen.
51B0346B_ENG.indd 59
51B0346B_ENG.indd 59
Connection to other equipment
to select TV or MONITOR.
The AV Colour setting only applies when viewing
devices connected to the AV inputs.
1
2
3
4
Note:
•
PAL is the colour system used in Germany. NTSC 3.58 is
used in the USA, PAL 60 used in Germany handled video
recorders, which play NTSC video tape recording.
If the picture shows horizontal stripes:
Set to AUTO as the description above.
AV colour adjustment
In
, select AV COLOUR, then
press ENTER.
Press
or
to select AUTO.
If AUTO option does not work, press
desired colour (e.g. NTSC 3.58).
Press EXIT to return to the normal screen.
AV1 OUTPUT
TV
AV COLOUR
AUTO
REC SCREEN STATUS
OFF
RESET TV SETTING
TV
AV1 OUTPUT
TV
AV COLOUR
AUTO
REC SCREEN STATUS
OFF
RESET TV SETTING
AUTO
or
to select
59
6/13/08 10:08:02 AM
6/13/08 10:08:02 AM
Advertisement
Table of Contents
