Specially Marked Text; Documents Required; Tools And Measuring Instruments Required - Siemens POLYMOBIL III Service Instructions Manual

Prerequisites

Specially marked text

WARNING
CAUTION
NOTE

Documents required

•
Wiring diagram
•
Description of functions

Tools and measuring instruments required

•
Usual service tools
•
Digital multimeter:
Fluke 8060 A
•
2 channel storage oscilloscope:
Tektronik Type 2232
•
mAs meter
•
Protective ground wire and leakage current
tester: BENDER safety tester
•
Radiation detector
See SPEED INFO 93/91
CAUTION
Siemens AG
Medical Solutions
All texts marked with "Warning" contain information regarding
potential hazards to health or life.
All texts marked "Caution!" contain information regarding poten-
tial hazards and steps to be taken to avoid hazards.
All texts marked "Note:" contain additional information regarding
the following procedure step. It is intended to clarify the step or to
indicate ways to avoid predictable problems.
X038I
RXB8-115.041.02...
During oscilloscope operation the protective ground wire connec-
tion in the power cable must not be interrupted under any circum-
stances.
For measurements where ground loops that may be present could
impair the measuring result, use the TEK amplifier and the trigger
attachment.
RXB8-115.061.02
Rev. 01
97 02 101 Y4290
97 02 234 Y3155
81 60 400 RE999
97 06 979 Y0526
96 60 754 RE999
Page 1 of 4
10.95 CS PS 24
1 - 1
1
1
1
1
POLYMOBIL III