Training Of Customer Support Engineers; Text Emphasis; Symbols - Siemens MOBILETT Plus HP Installation And Setting Instructions Manual

General

Training of customer support engineers

Due to the technology, used in this equipment, the setup, service and maintenance
is only allowed to be performed by a customer support engineer with a Work Permit for
MOBILETT Plus HP.

Text emphasis

DANGER
WARNING
CAUTION
NOTICE
NOTE

Symbols

Checks and adjustments that must be performed with radiation ON are identified by the
radiation warning symbol.
This symbol means "Dangerous voltage".
This symbol means "Attention, consult the documentation".
U
Several of the sections in these instructions are for the USA only. These sections are iden-
S
A
tified with this symbol.
This symbol indicates components sensitive to Electro-Static Discharge (ESD).
Siemens-Elema AB
Solna, Sweden
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips.
SPR8-220.033.03
Rev. 02
Page 1 of 8
10.02 SPS-UD
1 - 1
1
1
1
1
MOBILETT Plus HP