Table of Contents
Advertisement
English
Self-diagnosis display
Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) on the screen or in the display
window. If a 5-digit code is displayed, check the
following code chart. The last 2 digits (indicated by
ss) will differ depending on the state of your
camcorder.
Five-digit display
C:04:ss
C:21:ss
C:22:ss
C:31:ss
C:32:ss
E:61:ss
E:62:ss
E:91:ss
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.
LCD screen, Viewfinder
or Display window
Self-diagnosis display
•C:ss:ss
•E:ss:ss
Cause and/or Corrective Actions
• You are using a battery pack that is not an
"InfoLITHIUM" battery pack.
c Use an "InfoLITHIUM" battery pack.
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least one hour to acclimatise. (p. 229)
• The video heads are dirty.
c Clean the heads using the cleaning cassette (optional).
(p. 230)
• A malfunction other than the above that you can service
has occurred.
c Remove the cassette and insert it again, then operate
your camcorder.
c Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorised Sony
service facility and inform them of the 5-digit code.
(example: E:61:10)
C:21:00
You can service your camcorder
yourself.
Contact your Sony dealer or local
authorised Sony service facility.
209
Advertisement
Table of Contents
