Table of Contents
Advertisement
"Important: Read these instructions for use carefully so as to
familiarize yourself with the appliance before connecting it to its
gas container. Keep these instructions for future reference".
This appliance is adjusted to operate on LPG only.
IF YOU SMELL GAS:
•
Turn off gas supply at bottle
•
Extinguish all naked flames;
•
Do not operate any electrical appliances
Ventilate the area
•
Check for leaks as detailed in this manual If odour persists,
•
contact your dealer or gas supplier immediately
Do not tamper or modify the appliance.
BURN-BACK (FIRE IN BURNER TUBE OR CHAMBER)
In the event of a burn-back, where the flame burns back to the
jet, immediately turn the gas supply off at the control valve on
the panel. After ensuring the flame is extinguished, wait for I
minute and re-light the appliance in the normal manner. Should
the appliance again burn back, close the control valve and call
a service technician. Do not use the appliance again until the
service technician has declared that it is safe to do so.
GAS-PRESSURE REGULATOR
This appliance requires an operating pressure of 2,8 kPa at
the appliance. A suitable LPG regulator that complies with the
requirements of SANS 1237 must be installed.
FOR YOUR SAFETY
3
Advertisement
Table of Contents
