Table of Contents
Advertisement
ELECTRICAL CONNECTION
1. Your oven requires 16 or 32 Ampere fuse according to
the appliance's power. If necessary, installation by a qualified
electrician is recommended.
2. Your oven is adjusted in compliance with 220-240 V 50/60 Hz.
electric supply. If the mains are different from this specified
value, contact your authorized service.
3. Electrical connection of the oven should only be made by
the sockets with earth system installed in compliance with the
regulations. If there is no proper socket with earth system in
the place where the oven will be placed, immediately contact a
qualfied electrician. Manufacturer shall never be responsible from
the damages that will arise because of the sockets connected to
the appliance with no earth system. If the ends of the electrical
connection cable are open, according to the appliance type, make
a proper switch installed in the mains by which all ends can be
disconnected in case of connecting / disconnecting from / to the
mains.
4. If your electric supply cable gets defective, it should definitely
be replaced by the authorized service or qualfied electricians in
order to avoid from the dangers.
5. Electrical cable should not touch the hot parts of the appliance.
6. Please operate your oven in dry atmosphere.
Electrical connection scheme
19
220-240 V 50/60 Hz
L1
Neutral
Earth
H05 VV-F 3G 2.5 mm²
Advertisement
Table of Contents
