Table of Contents
Advertisement
INSTALLATION OF YOUR OVEN
Check if the electrical installation is proper to bring the appliance
in operating condition. If electricity installation is not suitable, call
an electrician and plumber to arrange the utilities as necessary.
Manufacturer shall not be held responsible for damages caused
by operations performed by unauthorized persons.
WARNING: It is customer's responsibility to prepare the location
the product shall be placed on and also to have the electrical
installation prepared.
WARNING: The rules in local standards about electrical
installations shall be followed during product installation.
WARNING: Check for any damage and clean the tape glues on the
appliance before installing it. Do not have the product installed
if it is damaged. Damaged products cause a risk for your safety.
Right Place for Installation and Important Warnings
Appliance feet should not stay on soft surfaces such as carpets.
The kitchen floor shall be durable to carry the unit weight and
any other kitchenware that may be used on the oven.
The appliance is suitable for use on both side walls, without
any support, or without being installed in a cabinet. If a hood or
aspirator will be installed above the cooker, follow the instructions
of the manufacturer for height of mounting. (min. 650 mm)
If installing the oven in a built-in cabinet, the cabinet must have
its plastic surfaces and adhesive parts resistant to temperatures
in accordance to EN 60335. Samsung is not responsible for dam-
age to furniture from the oven's heat emission.
The oven must be properly ventilated. For ventilation, leave a
gap of about 50 mm between the lower shelf of the cabinet and
the supporting wall. If you install the oven under a cooktop, fol-
low the cooktop's installation instructions.
29
Advertisement
Table of Contents
