Table of Contents
Advertisement
For LPG connection;
Main gas pipe
Gasket
Hose inlet connector
Metal clamp
LPG connection hose
NOTE: The regulator to be affixed on LPG cylinder should have
300 mmSS feature.
For natural gas connection;
Main gas pipe
Gasket
Nut
Natural gas
connection hose
For LPG (cylinder) connection, affix
metal clamp on the hose coming from
LPG cylinder. Affix an edge of the hose
on hose inlet connector behind the
appliance by pushing to end through
heating the hose in boiled water.
Afterward, bring the clamp towards
end section of the hose and tighten it
with screwdriver. The gasket and hose
inlet connector required for connection
is as the picture shown below.
WARNING: Natural gas connection
should be done by authorized service.
For natural gas connection, place
gasket in the nut at the edge of natural
gas connection hose. To install the
hose on main gas pipe, turn the nut.
Complete the connection by making
gas leakage control.
21
Advertisement
Table of Contents
