3Electrical Junction Box Mount Using Mount Plate; Power The Mr55-Hw - Cisco Meraki MR55-HW Hardware Installation Manual

4.2.1.3 Electrical Junction Box Mount Using Mount Plate
The MR55-HW can be mounted to a 4" square cable junction box, a 3.5 or 4" round cable junction
box, or various U.S. and European outlet boxes (mounting screws are not included).
Using appropriate mounting hardware for your specific type of junction box, attach the
mount

4.2.2 Power the MR55-HW

If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the
Mount Plate.
If mounting to a wall or ceiling, the Ethernet cable will feed through the cable slot on bottom of the MR55-
HW.
17