Table of Contents
Advertisement
Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
Press
to answer an incoming call when
another call is active. The original call is placed
on hold.
Press
again to return to the original call.
To ignore the incoming call, continue with the
original call with no action.
Press
to disconnect the current call and
switch to the call on hold.
Three Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press
with Ready followed by a tone.
2. Say Three way call . The system responds with
Three way call, please say dial or call .
. The system responds
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
the callers together.
Press
to end a call.
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
1. Press
. The system responds with Ready
followed by a tone.
2. Say Mute Call . The system responds with Call
muted .
1. Press
. The system responds with Ready
followed by a tone.
2. After the tone, say Mute Call . The system
responds with Resuming call .
to link all
4-129
Advertisement
Table of Contents
