Table of Contents
Advertisement
To set the time and date:
1. Turn the ignition key to ACC/ACCESSORY or ON/
RUN, then press the
2. Press the MENU button.
3. Press the
button to display HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year).
4. Press the softkey located under any one of the
tabs to change that setting.
5. To increase the time or date, do one of the
following:
Press the softkey below the selected tab.
Press the
SEEK button.
Press the
FWD button.
Turn the
knob clockwise.
4-84
button to turn the radio on.
6. To decrease the time or date, do one of the
following:
Press the
SEEK button.
Press the
REV button.
Turn the
knob counterclockwise.
To change the time default setting from 12 hour to
24 hour or to change the date default setting from
month/day to day/month:
1. Press the MENU button and then the softkey under
the
tab.
2. Press the softkey located below the forward arrow
tab. 12H, 24H, the date MM/DD (month and day),
and DD/MM/ (day and month) displays.
3. Press the softkey located below the desired option.
4. Press the MENU button again to apply the desired
option, or let the screen time out.
Advertisement
Table of Contents
