Table of Contents
Advertisement
1. Press and hold
responds with Ready followed by a tone.
2. Say Call . The system responds with Call using
<phone name>. Please say the name tag followed
by a tone.
3. Say the name tag of the person to call.
If the system clearly recognizes the name tag it
responds with OK, calling, <name tag> and
dials the number.
If the system is unsure it recognizes the right
name tag, it confirms the name tag followed by
a tone. If the name tag is correct, say Yes .
The system responds with OK, calling, <name
tag> and dials the number. If the name tag is
not correct, say No . The system will ask for
the name tag to be re entered.
Once connected, the person called will be heard
through the audio speakers.
4-128
for two seconds. The system
1. Press and hold
responds with Ready followed by a tone.
2. After the tone, say Re dial . The system responds
with Re dial using <phone name> and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press
and begin speaking to answer the call.
Press
to ignore a call.
for two seconds. The system
Advertisement
Table of Contents
