Connecting To The Internet Manually; Elements In The User Interface - Siemens Gigaset SX761 dsl Manual

The user interface

Connecting to the Internet manually

Once you have configured your Internet access (see page 29 and page 41), you can
establish a manual connection to the Internet on the start screen if you have selected
Connect on demand or Connect manually as the Connection mode.
To establish or end an Internet connection manually:
ì
Open the start screen of the Gigaset SX761 dsl as described on page 23.
If you have already started the user interface, click the Home tab at the top left of
the window.
If you have not yet started the user interface, do so now and log on.
ì
Click Connect to establish a connection to the Internet.
ì
Click Disconnect if you no longer require the connection.

Elements in the user interface

The user interface screens contain the following elements:
Button Log Off
The Log Off button is always displayed on the right of the user interface. If you click Log
Off, the session is ended and the login screen appears again.
Help
Click the question mark to display explanations about the current
user interface screen.
Buttons and icons used by the wizards
The wizards use graphic icons to show which steps you have already
carried out.
As soon as you have changed the configuration on a screen you can activate the new
u
setting by clicking Next >.
The < Back> button returns you to the previous configuration step.
u
Cancel returns you to the start screen. This button is not available for the initial con-
u
figuration of the device.
Buttons in the Advanced Settings menu
Transfers the settings you have made to the
OK
Gigaset SX761 dsl configuration.
Deletes all the entries on a screen since the last time you clicked OK.
Cancel
Other buttons may be displayed depending on the function in question. These are
explained in the relevant sections.
26