Table of Contents
Advertisement
Configuring Advanced Settings
VoIP settings
You will receive the access and configuration data for Internet telephony from your serv-
ice provider.
ì
In the Advanced Settings menu, select: Telephony – VoIP
ì
Select On if you wish to use Internet telephony (default setting).
ì
If you have defined more than one Connection service (see page 39), choose from
the list the Connection service, for which you want configure a VoiP account.
ì
If you have already configured Internet telephony in the Basic Setup Wizard, your
VoIP account will be shown with User name and SIP domain in addition to VoIP
accounts. If you want to change a previously configured VoIP account, click Edit
(page 64).
ì
If you want to configure additional VoIP accounts, click Add (page 64).
If you have configured VoIP settings in the Basic Setup Wizard the data for your VoIP
account is shown in this line. You can edit this data or add new data for additional
accounts.
ì
You can generally accept the default settings for Voice Quality:
– Maximum upstream bandwidth: The upstream transmission rate (upstream
bandwidth) varies depending on the provider and DSL tariff and is normally much
lower than the transmission rate for downstream data traffic. If there is upstream
62
Advertisement
Table of Contents
