Siemens Gigaset SX761 dsl Manual page 80

Administration
Remote Management enables a PC that is not in your local network to be used to con-
figure the Gigaset SX761 dsl via a standard Web browser. You can activate Remote Man-
agement for one particular or for any PC.
For security reasons, this function is only available if you have previously changed the
system password for your device (see page 78).
You can start remote management by entering the public IP address in your Internet
browser. As Internet providers often change this each time you dial in, it is also worth
using dynamic DNS (see page 55).
ì
Click the option On, to activate Remote Management.
The field IP address shows the public IP address. The field Dynamic DNS displays
the Domain name of the DNS service, if you have activated this function (see
page 55).
ì
You can change the Port via which you can access the configuration program from
the Internet, for example in order to mask and protect the configuration program
against unauthorised access.
ì
Access: You can select Read only if you only wish to activate remote management
for reading or you can select Full control if you wish to activate it for reading and
writing.
80