Siemens 4100 Series User Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Network Router
  5. 4100 Series
  6. User manual

Siemens 4100 Series User Manual

Router user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

SpeedStream
®
Router
User's Guide
Series 4100 and 4200
Part No. 007-4035-001

Advertisement

Table of Contents
loading

Related Manuals for Siemens 4100 Series

Summary of Contents for Siemens 4100 Series

  • Page 1 SpeedStream ® Router User’s Guide Series 4100 and 4200 Part No. 007-4035-001...
  • Page 2 A. Prior to returning a product under this warranty, the end user must first call SSN at (888) 286-9375, or send an email to SSN at support.ssn@siemens.com to obtain a return materials authorization (RMA) number. RMAs are issued between 8:00 a.m. and 5:00 p.m. Central Time, excluding weekends and holidays.
  • Page 3 Software License and Limited Warranty will remain in full force and effect. Any notices or other communications to be sent to SSN must be mailed by certified mail to the following address: Siemens Subscriber Networks 4849 Alpha Road Dallas, TX 75244 U.S.A.

  • Page 4: Table Of Contents

    Router User’s Guide INTRODUCTION... 3 Features of the SpeedStream Network (LAN) Features ... 3 Security Features... 3 Configuration & Management ... 4 Advanced Router Functions ... 4 Minimum System Requirements ... 4 General Safety Guidelines ... 4 PHYSICAL INSTALLATION... 5 Minimum System Requirements ...
  • Page 5 Router User’s Guide Dynamic DNS ... 37 CONFIGURING SECURITY FEATURES... 38 Admin User ... 39 Time Client... 40 NAT/NAPT Server...41 Firewall... 42 Level ... 43 Snooze... 44 DMZ ... 45 Filter Rules... 46 Log... 52 ADS... 53 MONITORING ROUTER HEALTH... 55 Status and Statistics...

  • Page 6: Introduction

    (Router) is a powerful yet simple communication device for connecting your computer or local area network (LAN) to the Internet. This manual covers the SpeedStream model series 4100 and 4200. SpeedStream 4100 Series (Ethernet) Features of the SpeedStream Your Router provides high-speed Internet and corporate network access to homes, networked home offices, and small offices.

  • Page 7: Configuration & Management

    Router User’s Guide • Virtual Private Network Virtual Private Network allows remote users to establish a secure connection to a corporate network by setting pass-through of the three most commonly used VPN protocols: PPTP, L2TP, and IPSec. Configuration & Management •...

  • Page 8: Physical Installation

    Residential Gateway Family User Guide Chapter 2 Physical Installation This chapter covers the physical installation of the SpeedStream Router. Minimum System Requirements • DSL service and an Internet access account from an Internet Service Provider (ISP). • Network cables for the device you intend to connect to the Router. Use standard CAT5 Ethernet cables with RJ45 connectors.

  • Page 9: Installing Line Filters

    Residential Gateway Family User Guide Installing Line Filters Because DSL shares your telephone line, you may need to separate the two signals so they do not interfere with each other. A line filter (may be included with some models) prevents DSL traffic from disrupting the voice signal on the telephone line, and vice versa.

  • Page 10: Connecting Cables

    Residential Gateway Family User Guide Connecting Cables The Router provides ports for either a USB or an Ethernet connection to your primary computer. Select the interface you will use to connect the Router, and follow the step-by-step instructions below for your chosen installation method.
  • Page 11 Residential Gateway Family User Guide USB Installation Method (Microsoft Windows) 2. Connect the DSL Cable 1) Connect the DSL cable (resembles a telephone cord) to the DSL port on the Router. 2) Plug the other end of the DSL cable into the phone jack. 3.

  • Page 12: Operating System Configuration

    Router User’s Guide Chapter 3 Operating System Configuration This chapter explains how to configure your computer to work with the Router. To access the Internet through the SpeedStream Router, the TCP/IP protocol must be installed on your computer. If TCP/IP is not already installed on your computer, refer to your system documentation or online help for instructions.

  • Page 13: Checking Tcp/Ip Settings (Windows 9X/Me)

    Router User’s Guide Checking TCP/IP Settings (Windows 9x/ME) 1. Select Start>Control Panel >Network. This displays the Configuration tab on the “Network” window. 2. Select the TCP/IP protocol for your network card. 3. Click Properties. This displays the “TCP/IP Properties” window. 4.

  • Page 14: Checking Tcp/Ip Settings (Windows 2000)

    Router User’s Guide Checking TCP/IP Settings (Windows 2000) 1. On the Windows taskbar click Start>Settings>Control Panel. This displays the “Control Panel” window. 2. Double-click Network and Dial-up Connections. This displays the “Network and Dial-up Connections” window. 3. Right-click Local Area Connection and select Properties. This displays the “Local Area Connections Properties”...

  • Page 15: Checking Tcp/Ip Settings (Windows Xp)

    Router User’s Guide Checking TCP/IP Settings (Windows XP) 1. On the Windows taskbar click Start>Control Panel. This displays the “Control Panel” window. Double-click the Network Connection icon. This displays the “Network Connections” window. 3. Right-click Local Area Connection, then click Properties. This displays the “Local Area Connection Properties”...

  • Page 16: Checking Tcp/Ip Settings (Mac Os 8.6 Through 9.X)

    Router User’s Guide Checking TCP/IP Settings (MAC OS 8.6 through 9.x) 1. Select Apple >Control Panel >TCP/IP. This displays the “TCP/IP” window. 2. Select one of the following from the Connect via drop-down menu. • Ethernet or Ethernet built-in if connecting via Ethernet. •...

  • Page 17: Checking Tcp/Ip Settings (Mac Osx)

    Router User’s Guide Checking TCP/IP Settings (MAC OSX) 1. Click Apple -> System Preferences. This displays the “System Preferences” window. 2. Double-click the Network icon under the Internet & Network section. This displays the “Network” window. 3. Select one of the following from the Show drop-down menu: •...

  • Page 18: Internet Access Configuration

    Router User’s Guide Internet Access Configuration Windows users must configure their computers to use the Router for Internet access. Ensure that the Router is installed correctly and the DSL line is functional. Then follow the appropriate procedure below to configure your Web browser to access the Internet via the LAN, rather than by a dial-up connection. For Windows 9x/2000 1.

  • Page 19: Speedstream Router Setup

    Router User’s Guide Chapter 4 SpeedStream Router Setup This chapter provides details for the Router setup processes. This chapter describes the steps to set up the SpeedStream Router configuration using the Router Setup Wizard. Other configuration may also be required on the Router, depending on which features and functions of the SpeedStream Router you wish to use.

  • Page 20: Connecting To The Router

    Router User’s Guide Connecting to the Router The SpeedStream Router contains an HTTP server that allows you to connect to the Router and configure it from your Web browser (Microsoft Internet Explorer or Netscape Navigator, versions 5.0 or later). To establish a connection from your computer to the Router: 1.

  • Page 21: Selecting Ppp Connection

    Router User’s Guide • If you have multiple Point-to-Point (PPP) connections configured, the PPP Login [choose connection] screen displays the available connections. Refer to more details. Point-to-Point offers the Connect on Demand feature whereby the router will attempt to log on to a disconnected PPP session if there is requested traffic from the LAN side, and if there is a saved user name and password.

  • Page 22: Ppp Login

    Router User’s Guide PPP Login If you have configured only one PPP (Point-to-Point) session on your computer, the “Login” window for that PPP connection is displayed after you log on using the “Administrative User Setup” window. 1. Front the PPP Login window, enter the Username and Password. 2.

  • Page 23: Home Window

    Router User’s Guide Home Window After initial startup, the “Home” window is displayed on startup. In the left navigation pane of the “Home” window, there are configuration, diagnostic, status and statistic options for the Router. The list of options displayed differs depending on how a user is logged into the system.

  • Page 24: Configuring User Profiles

    Router User’s Guide Chapter 5 Configuring User Profiles This chapter contains details for configuring users on the SpeedStream Router. User profiles are used as a means for controlling Router and network access by individual users. Access to the configuration and management of the Router should be restricted to authorized users only. This chapter describes how to: •...
  • Page 25 Router User’s Guide 6. Click Next. This displays the “Profile Content Filtering” window. Content filtering restricts access to undesirable Web sites and Web content. 7. Select one of the following content filtering options: • Disable all Content Filtering User has access to all Internet content without restrictions. •...
  • Page 26 Router User’s Guide 11. Optionally do one of the following: • Click one or more of the available features permitting the user to access that feature. This places a checkmark in the corresponding box. (Click again if you want to remove the checkmark and deny access).

  • Page 27: Editing User Profiles

    Router User’s Guide Editing User Profiles This section describes how to edit a user. To edit a user: 1. Select Setup>User Profiles from the left navigation pane of the Web interface. This displays the “Current Profiles” window. 2. Click the name of the user you want to change. This displays the “Profile User Information” window. Make any desired changes.

  • Page 28: Configuring Isp Connection Settings

    Router User’s Guide Chapter 6 Configuring ISP Connection Settings This chapter describes how to set advanced ISP configuration settings. The options in this section should only be configured with the help and guidance of your ISP. Incorrect changes to any of these options could result in the failure of your Internet connection.

  • Page 29: Host

    Router User’s Guide Host Host configuration attributes identify the Router on the network and, optionally, specify a default “gateway” to the Wide Area Network (WAN). Default values for many host IP address, netmask, default router and host name are automatically generated for the SpeedStream Router and should not be changed unless directed by your ISP.

  • Page 30: Dhcp

    Router User’s Guide DHCP DHCP, the Dynamic Host Configuration Protocol, describes the means by which a system can connect to a network and obtain the necessary information for communication upon that network. Do not change the default DHCP Configuration settings unless directed by your ISP. Note: All addresses must be entered as an Ipv4 subnet mask in dotted-decimal notation (for example, 255.255.255.0).
  • Page 31 Router User’s Guide 4. In End IP Range, enter the ending IP address of the range of addresses from which the DHCP server will lease to requesting DHCP clients. This range definition should consider the following address restrictions: • The range of IP addresses may extend over only one IP subnet. •...

  • Page 32: Static Routes

    Router User’s Guide Static Routes The SpeedStream DSL Router directs data traffic by “learning” source and destination information, then building a routing table. In some cases, network mappings cannot be learned because of incompatible addressing schemes. Sometimes a different source and destination path may be desired over the learned paths for example when your ISP assigns you a static route.

  • Page 33: Rfc2684

    Router User’s Guide RFC2684 The SpeedStream Router supports two basic types of connections: Point-to-Point (PPP) and RFC2684. By default, RFC2684 connections rely on a server located on the Wide Area Network (WAN) to supply the Router a dynamic IP address and other IP-based configuration parameters for the Router’s WAN-side interface.

  • Page 34: Configuring Network Settings

    Specify server ports used by common applications such as HTTP (Web site traffic), FTP, and Telnet. Dynamic DNS Set up Dynamic DNS. Dynamic DNS translates IP addresses into alphanumeric names. For example, an IP address of 333.136.249.80 could be translated into siemens.com.

  • Page 35: Rip (Routing Information Protocol)

    Router User’s Guide RIP (Routing Information Protocol) By default, the SpeedStream Router does not support routing protocols. However, support for the Routing Information Protocol (RIP), versions 1, 2 or 1 and 2, can be activated. This support may be configured for any WAN connection currently configured or for the LAN in general.

  • Page 36: Port Forwarding

    Router User’s Guide Port Forwarding Port forwarding allows selected servers running on the LAN side of the router to be accessed from the WAN side. Requests from the WAN to a configured TCP or UDP port will be forwarded to the selected IP address on the LAN.

  • Page 37: Upnp (Universal Plug And Play)

    Router User’s Guide UPnP (Universal Plug and Play) Microsoft UPnP allows the Router to communicate directly with certain Windows operating systems to trade information about the special needs of certain applications (such as messaging programs and interactive games) as well as provide information about other devices on the network, where applicable. This communication between the operating system and Router greatly reduces the amount of manual configuration required to use new applications and devices.

  • Page 38: Bridge Mode

    Router User’s Guide Configuring Network Settings Bridge Mode The Router supports two fundamental modes of operation with respect to connectivity between the Local Area Network (LAN) and the Wide Area Network (WAN): bridge/routing mode and bridge mode. The default mode of operation is bridge/routing mode. With bridge/routing mode, the Router provides typical routing functionality between the WAN side and the LAN side.

  • Page 39: Server Ports

    Router User’s Guide Server Ports Common applications such as HTTP (Web site traffic), FTP, and Telnet use pre-defined incoming port numbers for compatibility with other services. If you wish to change the ports used by these applications you may do so using this option. This feature is recommended for use by advanced users only. To configure the server port option: 1.

  • Page 40: Dynamic Dns

    Use the dynamic DNS advanced option to set up Dynamic DNS. Dynamic DNS translates IP addresses into alphanumeric names. For example, an IP address of 333.136.249.80 could be translated into siemens.com. To use the DDNS service, you must register for the service. You can register from the following web page: www.dydns.org/services/dydns.

  • Page 41: Configuring Security Features

    Router User’s Guide Chapter 8 Configuring Security Features The Router provides broad security measures against unwanted users. Security also allows for the configuration of the firewall, administrator password, (NAT) Network Address Translation, and DMZ (Demilitarized Zone) configuration. The security options are listed below. Admin User Manage administrator login name and password.

  • Page 42: Admin User

    Router User’s Guide Admin User The Administrator profile controls the requirements for logging into the Web interface and accessing configuration pages, as well as defining the administrator login name and password. To configure administrator settings: 1. Select Setup>Admin User from the left navigation pane of the Web interface. This displays the “Gateway Administrator Setup”...

  • Page 43: Time Client

    Router User’s Guide Time Client An accurate log timestamp is one of the requirements of the ICSA Labs firewall criteria (ver 3.0a). In order to maintain accurate timestamps in each log message, the firewall implements a Simple Network Time Protocol (SNTP) client. This allows the system to automatically synchronize its date and time with Coordinated Universal, the international time standard.

  • Page 44: Nat/Napt Server

    Router User’s Guide NAT/NAPT Server Hosts located on a Local Area Network (LAN) are often required to use private IP addresses as opposed to public IP addresses. Private IP addresses, however, are not known on the public Wide Area Network (WAN).

  • Page 45: Firewall

    Router User’s Guide Firewall A firewall is a system designed to prevent unauthorized access to or from a private network. The firewall is designed to protect hosts located on the Local Area Network (LAN) from attacks initiated on the Wide Area Network (WAN).

  • Page 46: Level

    Router User’s Guide Level The firewall contained within the Router may be configured to operate in one of several modes, referred to as levels. For ease of use, three generic levels are preconfigured – Low, Medium and High. A separate level, ICSA 3.0a Compliant, is provided for those users who require compliance with the criteria set forth by ICSA Labs for firewall behavior.

  • Page 47: Snooze

    Router User’s Guide Snooze The snooze feature allows you to temporarily disable the firewall for a set amount of time so outside support personnel can access your Router or network or so you can run an application that conflicts with the firewall.

  • Page 48: Dmz

    Router User’s Guide The firewall supports virtual DMZ in single (LAN) port router models. Virtual DMZ redirects traffic to a specified IP address rather than a physical port. Because this redirection is a logical application rather than physical, it is called “virtual DMZ.” Using virtual DMZ, a single node on the LAN can be made “visible”...

  • Page 49: Filter Rules

    Router User’s Guide Filter Rules If the firewall security level is set to Custom, this features allows you to specify a unique set of firewall rules for handling inbound and outbound traffic customized to the user’s specific requirements. In this mode of operation the firewall provides an extensive amount of configurability.
  • Page 50 Router User’s Guide Creating Custom IP Filter Rules To add a new rule: 1. Type up to a five digit numeric value in the Rule No box to uniquely identify the rule. 2. Select either Permit or Deny from the Access drop-down menu. Select Permit to allow the rule and Deny to prohibit the rule.
  • Page 51 Router User’s Guide 9. If you selected This IP Address, enter an IP address in the IP Address field. And do one of the following: • Enter a netmask in the Netmask field. • Or, select or Host to use your Router netmask as the source netmask. 10.
  • Page 52 Router User’s Guide TCP/UDP Options Window The “TCP/UDP Options” window is displayed if you select TCP or UDP protocol from the Definition” window. If you selected either of these protocol types, you must identify the source and destination ports. 1. Select one of the following options from the Source Port Operator drop-down menu and the Destination Port Operator drop-down menu: •...
  • Page 53 Router User’s Guide ICMP Options Window The “ICMP Options” window is displayed if you select ICMP protocol from the window. 1. Do one of the following: • Select any of the ICMP options you wish to filter. • Select the All Types checkbox to filter all options. 2.
  • Page 54 Router User’s Guide Clone IP Filter Rules The “Clone Rule Definitions” window is displayed when you select Clone IP Filter Level from the “Firewall IP Configuration Wizard” window. Using this option, you can clone either high or low level rules and modify them according to your needs.

  • Page 55: Log

    Router User’s Guide Monitoring Network Health Firewall Logging displays attempts (both failures and successes) to access data through he firewall. Firewall log entries are defined on the Firewall Settings Configuration screen found under the Security menu. To view the firewall log, select Setup>Firewall>Log from the left navigation pane of the Web interface. This displays the “Firewall Log”...

  • Page 56: Ads

    Router User’s Guide The firewall provides an advanced Attack Detection System (ADS) that may be used to detect and identify various types of attacks initiated on the Wide Area Network (WAN). The system has the capability to detect such attacks the moment they start and to protect the Local Area Network (LAN) from such attacks.
  • Page 57 Router User’s Guide • LAN Source Address on LAN An outside device can send a forged source address in an incoming IP packet to block trace back. • Invalid IP Packet Fragment An outside device can send fragmented data packets that can bring down your system. IP packets can be fairly large in size.

  • Page 58: Monitoring Router Health

    Router User’s Guide Chapter 9 Monitoring Router Health This chapter describes how to monitor the health of the Router. The Router health options listed below are used to gauge the Router’s health. Status and Statistics View Internet, home networking, security statistics, system and firewall log files.

  • Page 59: System Summary

    Router User’s Guide Monitoring Network Health System Summary The “System Summary” window provides basic descriptive information that identifies the router, system type, current software and firmware versions, the MAC address (unique device identifier), and the status of currently configured connections. Connection information includes the identification and current status of configured point-to-point (PPP) and static connections.
  • Page 60 Router User’s Guide Monitoring Network Health ATM Statistics View status and statistical information for the WAN-side Asynchronous Transfer Mode (ATM) network connection. WAN-side connection to the service provider is based on an Asynchronous Transfer Mode (ATM) network connection. In addition, statistical information is provided for each Virtual Circuit (VC) configured under the ATM Adaptation Layer (AAL).
  • Page 61 Router User’s Guide Monitoring Network Health Ethernet Statistics View status and statistical information for LAN-side Ethernet connectivity. Pay special attention to the status (up or down) reported for each Ethernet port to verify that each cable is connected properly and detected by the Router.

  • Page 62: Diagnostics

    Router User’s Guide Diagnostics The Router provides a considerable amount of diagnostic functionality for testing connectivity on both the Local Area Network (LAN) and the Wide Area Network (WAN). This includes LAN-side connections within the home and WAN-side connections to the carrier, service provider and Internet. WAN-side testing may be performed for each of the WAN-side connections currently configured.

  • Page 63: Tools

    Router User’s Guide Tools This section describes how to use the tools listed below. Interface Map View a graphical representation of the current LAN and WAN configurations. Reboot Reboot the Router. Update Update Router firmware. Interface Map Some Router configurations provide a graphical representation of the current LAN and WAN configurations.

  • Page 64: Reboot

    Router User’s Guide Reboot You can reboot the Router using the Reboot option, or you can reset the Router to factory defaults using the Reset option. Reboot should be used when the Router needs to be restarted without losing your current configuration settings.

  • Page 65: Update

    Router User’s Guide Update This features updates the firmware of your Router through the Internet or from a device connected to your Router. Note: This option may not be available on your Router configuration. To update the firmware: 1. Select Tools>Update from the left navigation pane of the Web interface. This displays “System Update”...

  • Page 66: Troubleshooting

    Router User’s Guide Appendix A Troubleshooting Connection problems usually occur when the router’s software configuration contains incomplete or incorrect information. The router’s diagnostic tools can help you identify and solve many of these problems. Basic Troubleshooting Steps Before contacting Technical Support, you should attempt to resolve the issue by following these steps: 1.

  • Page 67: Interpreting The Led Display

    Router User’s Guide Interpreting the LED Display The LED indicators on the front of the router give you a visual clue to the router activity. When the router is configured and working correctly, all LED indicator lights briefly turn a solid green. The following table shows the possible states indicated by the LEDs.

  • Page 68: Resolving Specific Issues

    Router User’s Guide Resolving Specific Issues pwr LED Not Lit If the pwr (power) LED i not lit, it is not connecting to the power source. Verify that the power cord is firmly plugged into the back panel of the router and that the other end is plugged into an active AC wall or power-strip outlet.

  • Page 69: Contacting Technical Support

    Router User’s Guide Contacting Technical Support If you still cannot resolve the issue after following the recommended troubleshooting procedures, contact Efficient Networks Technical Support. Telephone: (972) 852-1000 Fax: (972) 852-1001 Email: ssn@siemens.com Internet: http://www.support.ssn@siemens.com Troubleshooting...

  • Page 70: Configuration Data Sheets

    Router User’s Guide Appendix B Configuration Data Sheets Your router is preconfigured with settings specific to your network. We strongly suggest that you record these settings in case you need to reestablish your original configuration. Administrative User Setup Parameter User Name Password Attack Detection System Parameter...

  • Page 71: Dhcp

    Router User’s Guide DHCP Parameter DHCP Server Start IP Range End IP Range IP Netmask Default Router Or Self DNS Server Or Use Wan Domain Name Lease Time (Mins) Or Infinite Time Firewall – Custom IP Filter Configuration Parameter Rule # Status Access Direction...
  • Page 72 Router User’s Guide Configuration Data Sheets Parameter Default Value Your Value Destination Port Operator Enable/Disable Rule # Status Access Direction Protocol Source Interface Source Address Source Mask Destination Port Operator Enable/Disable Rule # Status Access Direction Protocol Source Interface Source Address Source Mask Destination Port Operator Enable/Disable...
  • Page 73 Router User’s Guide Configuration Data Sheets Parameter Default Value Your Value Enable/Disable Rule # Status Access Direction Protocol Source Interface Source Address Source Mask Destination Port Operator Enable/Disable Rule # Status Access Direction Protocol Source Interface Source Address Source Mask Destination Port Operator Enable/Disable Rule #...

  • Page 74: Firewall - Dmz

    Router User’s Guide Firewall - DMZ Parameter Status Enable With Host IP Address Enable With Host Name Settings Duration Firewall – Level Parameter Level Firewall – Snooze Control Parameter Snooze Control Disable Enable, Set Time Interval To: Reset Time Interval To Host Parameter IP Address...
  • Page 75 Router User’s Guide Configuration Data Sheets Parameter Default Value Your Value NAPT Enabled Interface 2 NAT/NAPT Disabled NAT Enabled Internal (LAN) IP Address NAPT Enabled Interface 3 NAT/NAPT Disabled NAT Enabled Internal (LAN) IP Address NAPT Enabled Interface 4 NAT/NAPT Disabled NAT Enabled Internal (LAN) IP Address NAPT Enabled...

  • Page 76: Port Forwarding

    Router User’s Guide Parameter Internal (LAN) IP Address NAPT Enabled Port Forwarding Parameter Default Value Default Value Configuration Data Sheets Your Value Your Value...

  • Page 77: Ppp Login

    Router User’s Guide PPP Login Parameter Connection 1 User Name Password Access Connection Service Name Auto-Connect On Disconnect Use Idle Time-Out Connection 2 User Name Password Access Connection Service Name Auto-Connect On Disconnect Use Idle Time-Out Connection 3 User Name Password Access Connection Service Name...

  • Page 78: Rip

    Router User’s Guide Parameter Static Route Parameter Destination Netmask Next Hop Interface System Log Parameter Log Capture Level Time Client Parameter Disabled Primary Server IP Address Secondary Server IP Address Default Value Default Value Default Value Default Value Configuration Data Sheets Your Value Your Value Your Value...

  • Page 79: Upnp

    Router User’s Guide UPnP Parameter Disabled Discovery and Advertisement Only Full IGD-Supported Enable Access Logging Read-Only Mode Default Value Configuration Data Sheets Your Value...

  • Page 80: Technical Specifications

    Router User’s Guide Appendix C Technical Specifications AAL and ATM Support VCI 0-65535 address range VPI 0-255 address range AAL5 support Bridging IEEE 802.1.d Transparent Learning Bridge Spanning Tree support Certifications FCC Part 15, Class B CE certification Connectors DSL interface: RJ-11 or RJ-45 (Europe) Ethernet interface: RJ-45 USB Type B interface (5200, 5500 series) Diagnostic LEDs...
  • Page 81 Router User’s Guide DHCP server/DHCP client outing Network Address Port Translation (NAPT) Network Address Translation (NAT) Packet filtering RFC 2364 Point-to-Point Protocol over ATM PVCs (PPPoA) RFC 2516 Point-to-Point Protocol over Ethernet (PPPoE) RFC 2684 (formerly 1483) Bridged Ethernet and routed encapsulation Routing Standards Compliance USB 1.1...

  • Page 82: Firewall Security Levels

    Router User’s Guide Appendix D Firewall Security Levels The following table shows the security of each mode of the firewall for specific applications and protocols. Note: All applications and protocols are conditionally allowed IN if the outbound session was initiated locally and allowed OUT.
  • Page 83 Router User’s Guide Security Application/ High Protocol H.323 Half Life Heretic II Hexen II HTTP HTTPS ICMP ICQ 2000 ICU II IGMP IPSec multi-session IPSec single-session Kali L2TP MechWarrior 4 Mplayer MS Netmeeting MSN Gaming Zone MSN Messenger Myth Napster Need for Speed Net2telephone Netshow Client...
  • Page 84 Router User’s Guide Security Application/ High Protocol PPPoE PPTP multi-session PPTP single-session Quake Arena Quake II Quicktime 4 Rainbow Six Real Audio Real Video Red Alert II Rogue Spear RTSP SMTP Soldier of Fortune Starcraft T.120 Telnet Tiberian Sun Traceroute Ultima Online Unreal Tournament Warcraft...
  • Page 85 Router User’s Guide Siemens Subscriber Networks 4849 Alpha Road Dallas, TX 75244 USA (972) 852-1000 Tel (972) 852-1001 Fax support.ssn@siemens.com http://www.support.siemens.com...

This manual is also suitable for:

4200 seriesSpeedstream series 4100Speedstream series 4200

Table of Contents