Chevrolet 2009 Traverse Owner's Manual page 233

Sending a Stored Name Tag
During a Call
b g
1. Press . The system
responds with "Ready" followed
by a tone.
2. Say "Send name tag."
The system responds with
"Say a name tag to send tones"
followed by a tone.
3. Say the name tag to send.
•
If the system clearly
recognizes the name tag
it responds with "OK,
Sending <name tag>"
and the dial tones are
sent and the call continues.
•
If the system is not sure it
recognized the name tag
properly, it responds "Dial
<name tag>, Please say yes
or no?" followed by a tone.
If the name tag is correct, say
"Yes". The system responds
with "OK, Sending <name
tag>" and the dial tones are
sent and the call continues.
Clearing the System
Unless information is deleted out
of the in-vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags
in the phonebook and phone pairing
information. For information on how
to delete this information, see the
above sections on Deleting a Paired
Phone and Deleting Name Tags.
Other Information
®
The Bluetooth word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such
marks by General Motors is under
license. Other trademarks and
trade names are those of their
respective owners.
Instrument Panel
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause
harmful interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
This device complies with RSS-210
of Industry Canada. Operation is
subject to the following two
conditions:
®
1. This device may not cause
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation of the
device.
Changes or modifications to
this system by other than an
authorized service facility could void
authorization to use this equipment.
3-113