Table of Contents
Advertisement
Three-Way Calling
Three-Way Calling must be
supported on the Bluetooth
phone and enabled by the
wireless service carrier to work.
1. While on a call press
The system responds with
"Ready" followed by a tone.
2. Say "Three-way call". The system
responds with "Three-way call,
please say dial or call".
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
b g
press
to link all the callers
together.
Ending a Call
c x
Press
to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that
the person on the other end of
the call cannot hear them.
b g
.
To Mute a call
1. Press
responds with "Ready" followed
by a tone.
2. Say "Mute Call". The system
responds with "Call muted".
To Cancel Mute
1. Press
responds with "Ready" followed
by a tone.
2. After the tone, say "Mute Call".
The system responds with
"Resuming call".
Transferring a Call
Audio can be transferred between
the in-vehicle Bluetooth system
and the cell phone.
b g
. The system
b g
. The system
Instrument Panel
To Transfer Audio to the Cell
Phone
During a call with the audio in the
vehicle:
b g
1. Press
. The system
responds with "Ready" followed
by a tone.
2. Say "Transfer Call." The system
responds with "Transferring call"
and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the
In-Vehicle Bluetooth System
The cellular phone must be
paired and connected with the
Bluetooth system before a call can
be transferred. The connection
process can take up to two minutes
after the key is turned to the ON/RUN
or ACC/ACCESSORY position.
During a call with the audio on the
b g
cell phone, press
for more than
two seconds. The audio switches
from the cell phone to the vehicle.
3-111
Advertisement
Chapters
Table of Contents
