Page 1: Table Of Contents
2009 Chevrolet Traverse Owner Manual Seats and Restraint ... 1-1 System Head Restraints ... 1-2 Front Seats ... 1-3 Rear Seats ... 1-9 Safety Belts ... 1-14 Child Restraints ... 1-27 Airbag System ... 1-46 Restraint System Check ... 1-59 ...
Page 2: Index
For vehicles ﬁrst sold in Canada, substitute the name “General Motors of Canada Limited” for Chevrolet Motor Division wherever it appears in this manual. Litho in U.S.A. Part No. 25792022 B Second Printing This manual describes features that may or may not be on your speciﬁc...
Page 3: Vehicle Symbols
Safety Warnings and Symbols A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this” or “Do not let this happen.” A box with the word CAUTION is used to tell about things that could hurt you or others if you were to ignore the warning.
Page 4: System
Preface Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. : Airbag Readiness Light : Air Conditioning : Antilock Brake System (ABS) : Audio Steering Wheel ®...
Page 5: Head Restraints
Seats and Restraint System Head Restraints Head Restraints ...1-2 Front Seats Manual Seats ...1-3 Seat Height Adjuster ...1-3 Power Seats ...1-4 Manual Lumbar ...1-4 Power Lumbar ...1-5 Heated Seats ...1-5 Heated and Cooled Seats ...1-5 Memory Seat and Mirrors ...1-6 Reclining Seatbacks ...1-8 Rear Seats Rear Seat Operation ...1-9...
Page 6: Seats And Restraint System
Seats and Restraint System Head Restraints The vehicle’s front seats have adjustable head restraints in all outboard seating positions. CAUTION With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash.
Page 7: Front Seats
Front Seats Manual Seats CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
Page 8: Power Seats
Seats and Restraint System Power Seats Driver Seat with Power Seat Control, Power Recline, and Power Lumbar shown A. Power Seat Adjustment Control B. Reclining Seatbacks on page 1-8. C. Power Lumbar on page 1-5. If the vehicle has power seats, the controls are located on the outboard side of the seats.
Page 9: Power Lumbar
Power Lumbar If the seats have power lumbar, the controls used to operate this feature are located on the outboard side of the seats. See “Power Lumbar” under Power Seats on page 1-4 for more information. To increase or decrease lumbar support, press and hold the front or rear of the control (C).
Page 10: Memory Seat And Mirrors
Seats and Restraint System (Heated Seat and Seatback): To heat the entire seat, press the button with the heated seat and seatback symbol. This symbol will appear on the climate control display to indicate that the feature is on. Press the button to cycle through the temperature settings of high, medium, and low and to turn the...
Page 11 See “MEMORY SEAT RECALL” under DIC Vehicle Customization (With DIC Buttons) on page 3-65 for more information. To stop recall movement of the memory feature at any time, press one of the power seat controls, memory buttons, or power mirror buttons.
Page 12: Reclining Seatbacks
Seats and Restraint System Reclining Seatbacks Manual Reclining Seatbacks CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 13: Rear Seats
CAUTION Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body.
Page 14 1-10 Seats and Restraint System Entering and Exiting the Third Row CAUTION Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position.
Page 15 Returning the Seat to the Seating Position To return the second row seat to its normal seating position: 1. Remove objects on the ﬂoor behind the second row seat or in the seat tracks on the ﬂoor. 2. Pull the seatback rearward until it is locked in place.
Page 16: Third Row Seats
1-12 Seats and Restraint System Third Row Seats CAUTION Using the third row seating position while the second row is folded, or pushed forward in the entry position, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position.
Page 17: Safety Belts
2. The headrest must be locked into place before sitting in the seat. CAUTION If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.
Page 18: Safety Belts
1-14 Seats and Restraint System Remove the bolts from the holes in the ﬂoor before installing the seats. 2. Place the seat on the vehicle ﬂoor so that the front seat hooks are on the vehicle bars. 3. Reinstall the bolts, and torque to 55 Y (41 lb ft).
Page 19 A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without safety belts they could have been badly hurt or killed.
Page 20 1-16 Seats and Restraint System Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... or the safety belts!
Page 21: How To Wear Safety Belts Properly
With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Will I be trapped in the vehicle after a crash if I am wearing a...
Page 22 1-18 Seats and Restraint System Occupants who are not buckled up can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. First, before you or your passenger(s) wear a safety belt, there is important information you should know.
Page 23 What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. Seats and Restraint System CAUTION You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen.
Page 24 1-20 Seats and Restraint System What is wrong with this? The belt is over an armrest. CAUTION You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt.
Page 25 What is wrong with this? The belt is behind the body. Seats and Restraint System CAUTION You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury.
Page 26: Child Restraints
1-22 Seats and Restraint System Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. If you are using a rear seating position with a detachable safety belt and the safety belt is not attached, see Third Row Seats on page 1-12 for instruction on reconnecting the safety belt to the mini-buckle.
Page 27 See “Shoulder Belt Height Adjustment” later in this section for instructions on use and important safety information. 6. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull the stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants.
Page 28 1-24 Seats and Restraint System You can move the height adjuster up by pushing up on the shoulder belt guide. After the adjuster is set to the desired position, try to move it down without pushing the button to make sure it has locked into position.
Page 29 To access the comfort guide, you will ﬁrst need to move the headrest forward by pulling on the handle behind the seatback. The comfort guide will now be accessible. Third Row Center Position Pull the comfort guide out of its storage location and then return the headrest to its upright position.
Page 30: Safety Belt Use During Pregnancy
1-26 Seats and Restraint System CAUTION A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest.
Page 31: Child Restraints
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 32 1-28 Seats and Restraint System What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck.
Page 33 CAUTION Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt.
Page 34 1-30 Seats and Restraint System CAUTION Never do this. Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) infant will suddenly become a...
Page 35 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
Page 36: Child Restraint Systems
1-32 Seats and Restraint System Child Restraint Systems (A) Rear-Facing Infant Seat A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.
Page 37: Where To Put The
Securing an Add-On Child Restraint in the Vehicle CAUTION A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that child restraint and the instructions...
Page 38 1-34 Seats and Restraint System A label on the sun visor says, “Never put a rear-facing child restraint in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inﬂates.
Page 39 Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Page 40 1-36 Seats and Restraint System Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints with top tethers are designed for use with or without the top tether being attached.
Page 41 Third Row (Top Tether Anchor): Seating positions with top tether anchors. To assist you in locating the lower anchors, each second row anchor position has a label, near the crease between the seatback and the seat cushion. Seats and Restraint System To assist you in locating the top tether anchors, the top tether anchor symbol is located on the cover or...
Page 42 1-38 Seats and Restraint System Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
Page 43 CAUTION Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been installed.
Page 44 1-40 Seats and Restraint System 2.3. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback.
Page 45 If the position you are using has a ﬁxed headrest or head restraint and you are using a single tether, route the tether over the headrest or head restraint. 3. Push and pull the child restraint in different directions to be sure it is secure.
Page 46 1-42 Seats and Restraint System 3. Push the latch plate into the buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Page 47: Front Seat Position
See Lower Anchors and Tethers for Children (LATCH) on page 1-35 for more information. 7. Push and pull the child restraint in different directions to be sure it is secure. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position.
Page 48 1-44 Seats and Restraint System install the child restraint using LATCH. If a child restraint is secured using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH) on page 1-35 for top tether anchor locations.
Page 49 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. Seats and Restraint System 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
Page 50: Airbag System
1-46 Seats and Restraint System Airbag System The vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front passenger. • A seat-mounted side impact airbag for the driver. • A seat-mounted side impact airbag for the right front passenger.
Page 51 CAUTION Airbags inﬂate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward.
Page 52: Where Are The Airbags
1-48 Seats and Restraint System Where Are the Airbags? The driver frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger side. Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front...
Page 53 Driver Side shown, Passenger Side similar The roof-rail airbags for the driver, right front passenger, passengers behind the driver and right front passenger, and the third row outboard passengers are in the ceiling above the side windows. Seats and Restraint System CAUTION If something is between an occupant and an airbag, the...
Page 54 1-50 Seats and Restraint System Frontal airbags may inﬂate at different crash speeds. For example: • If the vehicle hits a stationary object, the airbags could inﬂate at a different crash speed than if the vehicle hits a moving object. •...
Page 55: What Will You See After
What Makes an Airbag Inﬂate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inﬂator. Gas from the inﬂator ﬁlls the airbag causing the bag to break out of the cover and deploy. The inﬂator, the airbag, and related hardware are all part of the airbag module.
Page 56 1-52 Seats and Restraint System The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deﬂated airbags. Airbag inﬂation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle,...
Page 57: Passenger Sensing System
Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started. United States Canada Seats and Restraint System The words ON and OFF, or the symbol for on and off, are visible during the system check.
Page 58 1-54 Seats and Restraint System A label on the sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inﬂates.
Page 59 For some children, including children in child restraints, and for very small adults, the passenger sensing system may or may not turn off the right front passenger frontal airbag, depending upon the person’s seating posture and body build. Everyone in the vehicle who has outgrown child restraints should wear a safety belt properly —...
Page 60 1-56 Seats and Restraint System If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat.
Page 61 • Liquid pooled on the seat that has not soaked in may make it more likely that the passenger sensing system will enable (turn on) the passenger airbag while a child restraint or child occupant is on the seat. If the passenger airbag is turned on, the on indicator will be lit.
Page 62 1-58 Seats and Restraint System Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? Yes. If you add things that change the vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from...
Page 63: Restraint System Check
Because I have a disability, I have to get my vehicle modiﬁed. How can I ﬁnd out whether this will affect my airbag system? If you have questions, call Customer Assistance. The phone numbers and addresses for Customer Assistance are in Step Two of the Customer Satisfaction Procedure in this manual.
Page 64: Replacing Restraint System Parts After A
1-60 Seats and Restraint System Replacing Restraint System Parts After a Crash CAUTION A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any...
Page 65: Features And Controls
Features and Controls Keys Keys ...2-2 Remote Keyless Entry (RKE) System ...2-3 Remote Keyless Entry (RKE) System Operation ...2-4 Remote Vehicle Start ...2-6 Doors and Locks Door Locks ...2-8 Power Door Locks ...2-8 Delayed Locking ...2-8 Programmable Automatic Door Locks ...2-9 Rear Door Security Locks ...2-9 Lockout Protection ...2-9 Liftgate ...2-10...
Page 66: Keys
Features and Controls Storage Areas Glove Box ...2-52 Cupholders ...2-52 Instrument Panel Storage ...2-52 Center Console Storage ...2-52 Second Row Center Console ...2-53 Floor Mats ...2-54 Luggage Carrier ...2-54 Convenience Net ...2-55 Cargo Cover ...2-55 Cargo Tie Downs ...2-55 Cargo Management System ...2-55 Sunroof Sunroof ...2-56...
Page 67: Remote Keyless Entry (Rke) System
If you are locked out of the vehicle, call the Roadside Assistance Center. See Roadside Assistance Program on page 7-6. Remote Keyless Entry (RKE) System The Remote Keyless Entry (RKE) system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada.
Page 68: Remote Keyless Entry (Rke) System Operation
Features and Controls Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions work up to 195 feet (60 m) away from the vehicle. There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 2-3.
Page 69 (Vehicle Locator/Panic Alarm): Press and release to locate the vehicle. The parking lamps ﬂash and the horn sounds three times. Press and hold for more than two seconds to activate the panic alarm. The parking lamps ﬂash and the horn sounds repeatedly for 30 seconds.
Page 70: Remote Vehicle Start
Features and Controls Remote Vehicle Start This vehicle may have a remote starting feature that starts the engine from outside of the vehicle. If the vehicle has an automatic climate control system, the climate control system defaults to a heating or cooling mode depending on the outside temperatures.
Page 71 3. If it is the ﬁrst remote start since the vehicle has been driven, repeat these steps while the engine is still running, to extend the time by 10 minutes for the engine to continue to run. Remote start can be extended one time.
Page 72: Doors And Locks
Features and Controls Doors and Locks Door Locks CAUTION Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked.
Page 73: Rear Door Security Locks
This feature will not operate if the key is in the ignition. This feature can be programmed by using the Driver Information Center (DIC). See “DELAY DOOR LOCK” under DIC Vehicle Customization (With DIC Buttons) on page 3-65. Programmable Automatic Door Locks Vehicles with an automatic lock/unlock feature enable you to...
Page 74 2-10 Features and Controls Liftgate CAUTION Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled.
Page 75: Power Liftgate
Power Liftgate Power Liftgate Operation CAUTION Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled.
Page 76 2-12 Features and Controls Power Liftgate Button on Center Console • Press the liftgate button on the center console. • Press the touchpad switch on the outside liftgate handle. Pressing the buttons or touchpad switch a second time while the liftgate is moving reverses the direction.
Page 77 After removing the obstruction, the power liftgate operation can be used again. If the liftgate comes across more obstacles on the same power cycle, the power function deactivates, and you must manually open or close the liftgate. A message displays, LIFTGATE OPEN, to indicate that the liftgate is open.
Page 78: Windows
2-14 Features and Controls Windows CAUTION Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or...
Page 79 Uplevel shown, base similar The power window controls are located on each of the side doors. The driver door also has switches that control the passenger and rear windows. The power windows work with the ignition in ACC/ACCESSORY, ON/RUN or when Retained Accessory Power (RAP) is active.
Page 80: Theft-Deterrent Systems
2-16 Features and Controls Anti-Pinch Feature The anti-pinch feature is on windows with the express-up feature. If an object is in the way of the window as it is express-closing, or in certain weather conditions like severe icing, the window will stop and open to a factory preset position.
Page 81 When the door is closed, the security light stops ﬂashing and stays on solid for approximately 30 seconds. The content theft deterrent alarm is not armed until the security light goes off. If the delayed locking feature is active, the alarm is not activated until all doors are closed and the security light goes off.
Page 82: Immobilizer Operation
2-18 Features and Controls ® PASS-Key III+ Electronic Immobilizer The PASS-Key III+ system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 83 ® When the PASS-Key III+ system senses an incorrect key, the vehicle does not start. Anyone using a trial-and-error method to start the vehicle will be discouraged because of the high number of electrical key codes. If the engine does not start and the security light on the instrument panel comes on when trying to start the vehicle, there may be a problem with...
Page 84: Starting And Operating Your Vehicle
2-20 Features and Controls ® If the PASS-Key III+ key is lost or damaged, see your dealer/retailer or a locksmith to have a new key made. The SERVICE THEFT DETERRENT SYSTEM message displays on the Driver Information Center (DIC) when there is a problem with the theft-deterrent system.
Page 85: Ignition Positions
Ignition Positions The ignition switch has four different positions. In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied. Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key.
Page 86: Starting The Engine
2-22 Features and Controls Retained Accessory Power (RAP) These vehicle accessories can be used for up to 10 minutes after the ignition key is turned off: • Audio System • Power Windows • Sunroof (if equipped) Power to the windows and sunroof will work up to 10 minutes or until a door is opened.
Page 87: Engine Coolant Heater
Notice: Cranking the engine for long periods of time, by returning the key to the START position immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to let the cranking motor cool down.
Page 88: Automatic Transmission Operation
2-24 Features and Controls 3. Plug the cord into a normal, grounded 110-volt AC outlet. CAUTION Plugging the cord into an ungrounded outlet could cause an electrical shock. Also, the wrong kind of extension cord could overheat and cause a ﬁre. You could be seriously injured.
Page 89 press the shift lever button before shifting from P (Park) when the ignition key is in ON/RUN. If you cannot shift out of P (Park), ease pressure on the shift lever, then push the shift lever all the way into P (Park) as you maintain brake application.
Page 90 2-26 Features and Controls Electronic Range Select (ERS) Mode ERS mode allows you to choose the top-gear limit of the transmission and the vehicle’s speed while driving down hill or towing a trailer. The vehicle has an electronic shift position indicator within the instrument panel cluster.
Page 91: Parking Brake
When Tow/Haul is activated the Tow/Haul symbol will come on the instrument panel cluster. See “Tow/Haul Mode” under Towing a Trailer on page 4-25 for more information. Automatic Engine Grade Braking Automatic Engine Grade Braking assists when driving on a downhill grade.
Page 92: Shifting Into Park
2-28 Features and Controls Shifting Into Park CAUTION It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake ﬁrmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 93: Parking Over Things That Burn
If torque lock does occur, your vehicle may need to be pushed uphill by another vehicle to relieve the parking pawl pressure, so you can shift out of P (Park). Shifting Out of Park The vehicle is equipped with an electronic shift lock release system.
Page 94: Engine Exhaust
2-30 Features and Controls Engine Exhaust CAUTION Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: • The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody...
Page 95: Mirrors
CAUTION It can be dangerous to get out of the vehicle if the automatic transmission shift lever is not fully in P (Park) with the parking brake ﬁrmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to.
Page 96: Outside Power Mirrors
2-32 Features and Controls Automatic Dimming Mirror Operation Automatic dimming reduces the glare from the headlamps of the vehicle behind you. The dimming feature comes on and the indicator light illuminates each time the ignition is turned to start. Cleaning the Mirror Do not spray glass cleaner directly on the mirror.
Page 97: Outside Power Foldaway Mirrors
Outside Power Foldaway Mirrors Vehicles with outside power foldaway mirrors, have the controls located on the driver door armrest. Mirror Adjustment 1. Press (C) to fold the mirrors out to the driving position. 2. Press (D) to fold the mirrors in to the folded position.
Page 98: Blind Spot Mirrors
2-34 Features and Controls Blind Spot Mirrors The blind spot mirror is a small convex mirror built into the upper and outer corner of both outside mirrors. It is designed to increase driver visibility and show objects that may be in the vehicle’s blind zone. Driving with the Blind Spot Mirror The illustration represents how a...
Page 99: Outside Heated Mirrors
Using the Outside Mirror with the Blind Spot Mirror 1. Set the main mirror so that the side of your vehicle can just be seen and your blind spot mirror has an unobstructed view. 2. When checking for traffic or before changing a lane, look at the main driver/passenger side mirror to observe traffic in the...
Page 100: Object Detection Systems
2-36 Features and Controls Object Detection Systems Ultrasonic Rear Parking Assist (URPA) For vehicles with the Ultrasonic Rear Parking Assist (URPA) system, it operates at speeds less than 5 mph (8 km/h), and assists the driver with parking and avoiding objects while in R (Reverse).
Page 101 How the System Works URPA comes on automatically when the shift lever is moved into R (Reverse). The rear display brieﬂy illuminates to indicate the system is working. URPA operates only at speeds less than 5 mph (8 km/h). If the vehicle is above this speed, the red light on the rear display ﬂashes.
Page 102: Rear Vision Camera (Rvc)
2-38 Features and Controls When the System Does Not Seem to Work Properly If the URPA system does not activate due to a temporary condition, the message PARK ASSIST OFF displays on the DIC and a red light will be shown on the rear URPA display when the shift lever is moved into R (Reverse).
Page 103 CAUTION (Continued) So if you do not use proper care before backing up, you could hit a vehicle, child, pedestrian, bicyclist, or pet, resulting in vehicle damage, injury, or death. Even though the vehicle has the RVC system, always check carefully before backing up by checking behind and around the vehicle.
Page 104 2-40 Features and Controls 3. Select the Rear Camera Options screen button. The Rear Camera Options screen displays. 4. Select the Video screen button. When the Video screen button is highlighted the RVC system is on. The delay that is received after shifting out of R (Reverse) is approximately 10 seconds.
Page 105 Symbols The navigation system may have a feature that lets the driver view symbols on the navigation screen while using the rear vision camera. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols. If URPA has been disabled and the symbols have been turned on, the Rear Parking Assist Symbols Unavailable...
Page 106 2-42 Features and Controls The area displayed by the camera is limited and does not display objects that are close to either corner or under the bumper. The area displayed can vary depending on vehicle orientation or road conditions. The distance of the image that appears on the screen differs from the actual distance.
Page 107: Onstar System
• The back of the vehicle is in an accident, the position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer/retailer.
Page 108 2-44 Features and Controls OnStar service is provided subject to the OnStar Terms and Conditions included in the OnStar Subscriber glove box literature. Some services such as Remote Door Unlock or Stolen Vehicle Location Assistance may not be available until the owner of the vehicle registers with OnStar.
Page 109 OnStar Hands-Free Calling OnStar Hands-Free Calling allows eligible OnStar subscribers to make and receive calls using voice commands. Hands-Free Calling is fully integrated into the vehicle, and can be used with OnStar Pre-Paid Minute Packages. Most vehicles include 30 trial minutes good for 60 days.
Page 110 2-46 Features and Controls How OnStar Service Works The OnStar system can record and transmit vehicle information. This information is automatically sent to an OnStar Call Center when the OnStar button is pressed, the emergency button is pressed, or if the airbags or AACN system deploy.
Page 111: Universal Home Remote System
Universal Home Remote System The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting. This device complies with Part 15 of the FCC Rules.
Page 112 2-48 Features and Controls Do not use the Universal Home Remote with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read the instructions completely before attempting to program the Universal Home Remote.
Page 113 2. Hold the end of your hand-held transmitter about 1 to 3 inches (3 to 8 cm) away from the Universal Home Remote buttons while keeping the indicator light in view. The hand-held transmitter was supplied by the manufacturer of your garage door opener receiver (motor head unit).
Page 114 2-50 Features and Controls 7. Firmly press and release the “Learn” or “Smart” button. After you press this button, you will have 30 seconds to complete Step 8. 8. Immediately return to the vehicle. Firmly press and hold the Universal Home Remote button, chosen in Step 3 to control the garage door, for two seconds, and then release it.
Page 115 accepted by the Universal Home Remote. The Universal Home Remote indicator light will ﬂash slowly at ﬁrst and then rapidly. Proceed with Step 4 under “Programming Universal Home Remote” to complete. Using Universal Home Remote Press and hold the appropriate Universal Home Remote button for at least half of a second.
Page 116: Storage Areas
2-52 Features and Controls Storage Areas Glove Box Lift the glove box handle up to open it. Use the key to lock and unlock the glove box. Cupholders There are two cupholders, with removable liners, located in front of the center console. There may be cupholders located in the second row seat armrest.
Page 117: Second Row Center Console
Second Row Center Console For vehicles with a second row center console, open each area to access the storage compartment inside. To access the upper storage area, press the upper button (B) and lift up. To access the lower storage area, press the lower button (C) and lift up.
Page 118: Floor Mats
2-54 Features and Controls Floor Mats If the ﬂoor mat has a snap retainer, a grommet in the driver side ﬂoor mat attaches to a hook on the ﬂoor of the vehicle to secure the ﬂoor mat. To remove the ﬂoor mat, pull the mat towards the rear of the vehicle until the grommet can be removed from the hook.
Page 119: Convenience Net
Convenience Net Use the convenience net, located in the rear, to store small loads as far forward as possible. The net should not be used to store heavy loads. Cargo Cover For vehicles with a cargo cover, it can be used to cover items in the rear of the vehicle.
Page 120: Sunroof
2-56 Features and Controls Sunroof The vehicle may have a sunroof over the front seats and a rear sunroof over the second row seats. The rear sunroof does not open. The switches to operate the front sunroof and rear sunshade are located on the headliner above the rearview mirror.
Page 121: Instrument Panel
Instrument Panel Instrument Panel Overview Instrument Panel Overview ...3-4 Hazard Warning Flashers ...3-5 Horn ...3-5 Tilt and Telescopic Steering Wheel ...3-6 Turn Signal/Multifunction Lever ...3-6 Turn and Lane-Change Signals ...3-6 Headlamp High/Low-Beam Changer ...3-7 Flash-to-Pass ...3-7 Windshield Wipers ...3-7 Windshield Washer ...3-8 Rear Window Wiper/Washer ...3-9 Cruise Control ...3-9 Exterior Lamps ...3-11...
Page 122 Instrument Panel Cruise Control Light ...3-43 Highbeam On Light ...3-43 Tow/Haul Mode Light ...3-43 Fuel Gage ...3-43 Driver Information Center (DIC) Driver Information Center (DIC) ...3-44 DIC Operation and Displays (With DIC Buttons) ...3-45 DIC Operation and Displays (Without DIC Buttons) ...3-51 DIC Compass ...3-54 DIC Warnings and Messages ...3-56...
Page 123: Instrument Panel
Instrument Panel ✍ NOTES...
Page 124: Instrument Panel Overview
Instrument Panel Instrument Panel Overview...
Page 125: Hazard Warning Flashers
The main components of the instrument panel are listed here: A. Turn Signal/Multifunction Lever on page 3-6. Windshield Wipers on page 3-7. B. Instrument Panel Cluster on page 3-31. C. Audio Steering Wheel Controls on page 3-125. D. Instrument Panel Storage on page 2-52.
Page 126: Tilt And Telescopic Steering Wheel
Instrument Panel Tilt and Telescopic Steering Wheel The steering wheel can be adjusted. The adjustment lever is located on the left side of the steering column. Pull the lever down to move the steering wheel up or down and in or out.
Page 127: Windshield Wipers
Turn Signal On Chime If either one of the turn signals are left on and the vehicle has been driven more than 3/4 mile (1.2 km), a chime will sound. Headlamp High/ Low-Beam Changer Headlamp High/Low Beam Changer: Push the turn signal/ multifunction lever away from you to turn the high beams on.
Page 128: Windshield Washer
Instrument Panel Windshield Washer (Washer Fluid): Press the button located at the end of the turn signal/multifunction lever, to spray washer ﬂuid on the windshield. The wipers clear the windshield and either stop or return to the preset speed. The ignition key must be in ACC/ACCESSORY or ON/RUN for this to work.
Page 129: Cruise Control
Rear Window Wiper/Washer The rear wiper and rear wash button is located on the instrument panel below the climate control system. (Rear Wiper): Press to turn the rear wiper on and off. The wiper speed cannot be changed. (Wash): Press to spray washer ﬂuid on the rear window.
Page 130 3-10 Instrument Panel Setting Cruise Control Cruise control will not work if the parking brake is set, or if the master cylinder brake ﬂuid level is low. The cruise control light on the instrument panel cluster comes on after the cruise control has been set to the desired speed.
Page 131: Exterior Lamps
Using Cruise Control on Hills How well the cruise control will work on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain the vehicle speed.
Page 132: Delayed Headlamps
3-12 Instrument Panel (Headlamps): Turns on the headlamps together with the following lamps listed below. A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on. • Parking Lamps • Taillamps •...
Page 133: Fog Lamps
When the DRL are on, the regular headlamps, taillamps, sidemarker, and other lamps are not on. The instrument panel and cluster are also not on. The headlamps automatically change from DRL to the regular headlamps depending on the darkness of the surroundings. The other lamps that come on with the headlamps will also come on.
Page 134: Courtesy Lamps
3-14 Instrument Panel Courtesy Lamps When a door is opened, the courtesy lamps automatically come on. They make it easier when entering and exiting the vehicle. The lamps can also be turned on manually by fully turning the instrument panel brightness control clockwise.
Page 135: Reading Lamps
Delayed Entry Lighting Delayed entry lighting illuminates the interior for a period of time after all the doors have been closed. The ignition must be off for delayed entry lighting to work. Immediately after all the doors have been closed, the delayed entry lighting feature continues to work until one of the following occurs:...
Page 136 3-16 Instrument Panel When the battery’s state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gage or a voltage display on the Driver Information Center (DIC), you may see the voltage move...
Page 137: Accessory Power Outlet(S)
Accessory Power Outlet(s) Accessory power outlets let you plug in auxiliary electrical equipment, such as a cellular phone. The vehicle may have four accessory power outlets. They are located on the instrument panel below the climate controls, under the front center console cupholders, at the rear of the center console, and in the rear cargo area.
Page 138: Power Outlet 115 Volt Alternating Current
3-18 Instrument Panel Power Outlet 115 Volt Alternating Current For vehicles with this power outlet, it can be used to plug in electrical equipment that uses a maximum limit of 150 watts. The power outlet is located on the rear of the center console. An indicator light on the outlet turns on to show it is in use.
Page 139: Climate Controls
Climate Controls Climate Control System The heating, cooling, and ventilation in the vehicle can be controlled with this system. A. Fan Control B. Temperature Control C. Air Delivery Mode Control D. Air Conditioning E. REAR (Rear Climate Control) F. Recirculation G.
Page 140 3-20 Instrument Panel (Floor): Air is directed to the ﬂoor outlets, with some of the air directed to the windshield, side window, and second row ﬂoor outlets. In this mode, the system automatically selects outside air. Recirculation cannot be selected while in ﬂoor mode.
Page 141 The air conditioning system removes moisture from the air, so a small amount of water might drip under the vehicle while idling or after turning off the engine. This is normal. (Recirculation): Press to turn the recirculation mode on or off. An indicator light comes on when recirculation is on.
Page 142: Dual Automatic Climate Control System
3-22 Instrument Panel Dual Automatic Climate Control System The heating, cooling, and ventilation in the vehicle can be controlled with this system. A. Fan Control B. AUTO C. Defrost D. Recirculation E. REAR (Rear Climate Control) F. Air Delivery Mode Control G.
Page 143 Automatic Operation AUTO (Automatic): The system automatically controls the inside temperature, the air delivery, and the fan speed. To use automatic mode: 1. Press the AUTO button. When AUTO is selected, the current temperature(s) selected and AUTO is shown on the display.
Page 144 3-24 Instrument Panel PASS (Passenger): Press to set the passenger temperature to match the driver temperature setting. The PASS indicator will turn off. When the passenger temperature setting is different than the driver setting, the PASS indicator comes on. Manual Operation The air delivery mode or fan speed can be manually adjusted.
Page 145 (Defog): This mode clears the windows of fog or moisture. Air is directed to the windshield, ﬂoor outlets, and side window vents. When this mode is selected, the system turns off recirculation and runs the air conditioning compressor unless the outside temperature is less than 40°F (4°C).
Page 146 3-26 Instrument Panel This mode recirculates and helps to quickly cool the air inside the vehicle. It can be used to prevent outside air and odors from entering the vehicle. The recirculation mode cannot be used with ﬂoor, defog, or defrosting modes.
Page 147: Outlet Adjustment
The interior temperature sensor located on the instrument panel to the right of the steering column, measures the temperature of the air inside the vehicle. There is also an exterior temperature sensor located behind the front grille. This sensor reads the outside air temperature and helps maintain the temperature inside the vehicle.
Page 148: Rear Air Conditioning And Heating System
3-28 Instrument Panel Rear Air Conditioning and Heating System A. Fan Control B. Temperature Control C. Air Delivery Mode Control For vehicles with the rear climate control system, the controls are located on the rear of the center console. The system can also be controlled with the front controls.
Page 149 Rear Air Conditioning and Heating System and Electronic Climate Controls Rear Climate Control with Rear Seat Audio Controls A. Fan Control B. Air Delivery Mode Control C. Temperature Control For vehicles with the rear climate control system, the controls are located on the rear of the center console.
Page 150: Warning Lights, Gages, And Indicators
3-30 Instrument Panel (Air Delivery Mode Control): Press to manually change the direction of the airﬂow. Repeatedly press the button until the desired mode appears on the display. (Vent): Air is directed through the overhead outlets. (Bi-Level): Air is directed through the rear ﬂoor outlets, as well as the overhead outlets.
Page 151: Instrument Panel Cluster
Instrument Panel 3-31 Instrument Panel Cluster The instrument panel cluster is designed to show how the vehicle is running. It shows how fast the vehicle is going, about how much fuel is being used, and many other things needed to drive safely and economically. United States Uplevel version shown, Canada similar...
Page 152: Speedometer And Odometer
3-32 Instrument Panel Speedometer and Odometer The speedometer shows the vehicle’s speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer shows how far the vehicle has been driven, in either miles or kilometers. This vehicle has a tamper-resistant odometer.
Page 153: Airbag Readiness Light
Airbag Readiness Light This light shows if there is an electrical problem. The system check includes the airbag sensor, the pretensioners, the airbag modules, the wiring and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 1-46.
Page 154: Charging System Light
3-34 Instrument Panel Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol to let you know the status of the right front passenger frontal airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger frontal airbag is enabled...
Page 155: Voltmeter Gage
When this light comes on, the Driver Information Center (DIC) also displays the SERVICE BATTERY CHARGING SYSTEM message. See DIC Warnings and Messages on page 3-56 for more information. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.
Page 156: Brake System Warning Light
3-36 Instrument Panel Brake System Warning Light This vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working. If the warning light comes on, there is a brake problem.
Page 157: Stabilitrak Indicator Light
Antilock Brake System (ABS) Warning Light For vehicles with the Antilock Brake System (ABS), this light comes on brieﬂy when the engine is started. If the light does not come on, have it ﬁxed so it will be ready to warn if there is a problem.
Page 158: Engine Coolant Temperature Gage
3-38 Instrument Panel This light ﬂashes when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, the vehicle ® needs service. See StabiliTrak System on page 4-5 for more information.
Page 159: Tire Pressure Light
Tire Pressure Light If the vehicle has a tire pressure monitoring system, the tire pressure light provides information about tire pressures and the Tire Pressure Monitoring System. The light should come on brieﬂy as the engine is started. If it does not, have the vehicle serviced by your dealer/ retailer.
Page 160 3-40 Instrument Panel If the check engine light comes on and stays on, while the engine is running, this indicates that there is an OBD II problem and service is required. Malfunctions often are indicated by the system before any problem is apparent.
Page 161 Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. An emission system malfunction might be corrected by checking the following items: • Make sure the fuel cap is fully installed.
Page 162: Maintenance Schedule
3-42 Instrument Panel Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or might begin programs to inspect the emission control equipment on the vehicle. Failure to pass this inspection could prevent getting a vehicle registration. Here are some things to know to help the vehicle pass an inspection: •...
Page 163: Security Light
Security Light This light ﬂashes when the security system is activated. For more information, see Theft-Deterrent Systems on page 2-16. Cruise Control Light This light comes on whenever the cruise control is set. The light goes out when the cruise control is turned off.
Page 164: Driver Information
3-44 Instrument Panel An arrow on the fuel gage indicates the side of the vehicle the fuel door is on. Here are four things that some owners ask about. None of these show a problem with the fuel gage: • At the gas station, the gas pump shuts off before the gage reads full.
Page 165 DIC Operation and Displays (With DIC Buttons) If your vehicle has DIC buttons, the information below explains the operation of this system. The DIC has different displays which can be accessed by pressing the DIC buttons located on the instrument panel. See Instrument Panel Overview on page 3-4 for more information.
Page 166 3-46 Instrument Panel Vehicle Information Menu Items (Vehicle Information): Press this button to scroll through the following menu items: OIL LIFE Press the vehicle information button until OIL LIFE REMAINING displays. This display shows an estimate of the oil’s remaining useful life. If you see 99% OIL LIFE REMAINING on the display, that means 99% of the current oil life remains.
Page 167 FRONT TIRES or REAR TIRES On vehicles with the Tire Pressure Monitor System (TPMS), the pressure for each tire can be viewed in the DIC. The tire pressure will be shown in either pounds per square inch (psi) or kilopascals (kPa). Press the vehicle information button until the DIC displays FRONT TIRES PSI (kPa) LEFT ## RIGHT ##.
Page 168 3-48 Instrument Panel COMPASS ZONE SETTING This display will be available if the vehicle has a compass. See DIC Compass on page 3-54 for more information. COMPASS RECALIBRATION This display will be available if the vehicle has a compass. See DIC Compass on page 3-54 for more information.
Page 169 The trip odometer has a feature called the retro-active reset. This can be used to set the trip odometer to the number of miles (kilometers) driven since the ignition was last turned on. This can be used if the trip odometer is not reset at the beginning of the trip.
Page 170 3-50 Instrument Panel FUEL ECONOMY Press the trip/fuel button until FUEL ECONOMY displays. The FUEL ECONOMY display shows an estimate of the vehicle fuel economy under a given driving condition at a speciﬁc moment. For example, if the vehicle is accelerating and achieving low fuel efficiency this display will show fewer bars, but if the vehicle is cruising on...
Page 171 DIC Operation and Displays (Without DIC Buttons) If your vehicle does not have DIC buttons, the information below explains the operation of this system. The DIC has different displays which can be accessed by pressing the trip odometer reset stem located on the instrument panel cluster.
Page 172 3-52 Instrument Panel To use the retro-active reset feature, press and hold the trip odometer reset stem for at least four seconds. The trip odometer will display the number of miles (mi) or kilometers (km) driven since the ignition was last turned on and the vehicle was moving.
Page 173 PARK ASSIST To access this display, the vehicle must be in P (Park). If your vehicle has the Ultrasonic Rear Parking Assist (URPA) system, press the trip odometer reset stem until PARK ASSIST displays. This display allows the system to be turned on or off. Once in this display, press and hold the trip odometer reset stem to select between ON or OFF.
Page 174: Dic Compass
3-54 Instrument Panel DISPLAY LANGUAGE To access this display, the vehicle must be in P (Park). This display allows you to select the language in which the DIC messages will appear. To select a language: 1. Press the trip odometer reset stem until DISPLAY LANGUAGE displays.
Page 175 3. Press the set/reset button to scroll through and select the appropriate variance zone. 4. Press the trip/fuel button until the vehicle heading, for example, N for North, is displayed in the DIC. 5. If calibration is necessary, calibrate the compass. See “Compass Calibration Procedure”...
Page 176: Dic Warnings And Messages
3-56 Instrument Panel DIC Warnings and Messages Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another.
Page 177 BATTERY SAVER ACTIVE This message displays when the system detects that the battery voltage is dropping below expected levels. The battery saver system starts reducing certain features of the vehicle that you may be able to notice. At the point that the features are disabled, this message is displayed.
Page 178 3-58 Instrument Panel DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again.
Page 179 ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode. See Engine Overheating on page 5-22 for further information. This message also displays when the vehicle’s engine power is reduced.
Page 180 3-60 Instrument Panel LEFT REAR DOOR OPEN This message displays and a chime sounds if the driver side rear door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again.
Page 181 REMOTE KEY LEARNING ACTIVE This message displays while you are matching a Remote Keyless Entry (RKE) transmitter to your vehicle. See “Matching Transmitter(s) to Your Vehicle” under Remote Keyless Entry (RKE) System Operation on page 2-4 and DIC Operation and Displays (With DIC Buttons) on page 3-45 or DIC Operation and Displays (Without DIC Buttons)
Page 182 3-62 Instrument Panel SERVICE BATTERY CHARGING SYSTEM On some vehicles, this message displays if there is a problem with the battery charging system. Under certain conditions, the charging system light may also turn on in the instrument panel cluster. See Charging System Light on page 3-34.
Page 183 SERVICE TIRE MONITOR SYSTEM On vehicles with the Tire Pressure Monitor System (TPMS), this message displays if a part on the TPMS is not working properly. The tire pressure light also ﬂashes and then remains on during the same ignition cycle. See Tire Pressure Light on page 3-39.
Page 184 3-64 Instrument Panel TIGHTEN GAS CAP This message may display along with the check engine light on the instrument panel cluster if the vehicle’s fuel cap is not tightened properly. See Malfunction Indicator Lamp on page 3-39. Reinstall the fuel cap fully. See Filling the Tank on page 5-7.
Page 185: Dic Vehicle Customization
TURN SIGNAL ON This message displays and a chime sounds if a turn signal is left on for 3/4 of a mile (1.2 km). Move the turn signal/multifunction lever to the off position. WASHER FLUID LOW ADD FLUID This message displays when the windshield washer ﬂuid is low.
Page 186 3-66 Instrument Panel Feature Settings Menu Items The following are customization features that allow you to program settings to the vehicle: DISPLAY IN ENGLISH This feature will only display if a language other than English has been set. This feature allows you to change the language in which the DIC messages appear to English.
Page 187 To select a setting, press the set/reset button while the desired setting is displayed on the DIC. AUTO DOOR UNLOCK This feature allows you to select whether or not to turn off the automatic door unlocking feature. It also allows you to select which doors and when the doors will automatically unlock.
Page 188 3-68 Instrument Panel HORN ONLY: The horn will sound on the second press of the lock button on the RKE transmitter. HORN & LIGHTS (default): The exterior lamps will ﬂash when you press the lock button on the RKE transmitter, and the horn will sound when the lock button is pressed again within ﬁve seconds of the previous command.
Page 189 Then press the customization button to scroll through the following settings: OFF: There will be no delayed locking of the vehicle’s doors. ON (default): The doors will not lock until ﬁve seconds after the last door or the liftgate is closed. NO CHANGE: No change will be made to this feature.
Page 190 3-70 Instrument Panel The lights will remain on for 20 seconds or until the lock button on the RKE transmitter is pressed, or the vehicle is no longer off. See Remote Keyless Entry (RKE) System Operation on page 2-4 for more information. NO CHANGE: No change will be made to this feature.
Page 191 EASY EXIT SEAT If your vehicle has this feature, it allows you to select your preference for the automatic easy exit seat feature. See Memory Seat and Mirrors on page 1-6 for more information. Press the customization button until EASY EXIT SEAT appears on the DIC display.
Page 192 3-72 Instrument Panel REMOTE START If your vehicle has this feature, it allows you to turn the remote start off or on. The remote start feature allows you to start the engine from outside of the vehicle using the Remote Keyless Entry (RKE) transmitter.
Page 193: Audio System(S)
Exiting the Feature Settings Menu The feature settings menu will be exited when any of the following occurs: • The vehicle is shifted out of P (Park). • The vehicle is no longer in ON/RUN. • The trip/fuel or vehicle information DIC buttons are pressed.
Page 194: Setting The Clock
3-74 Instrument Panel Setting the Clock To adjust the time and date: 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press , to turn the radio on. 2. Press to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year).
Page 195: Radio(S)
Instrument Panel 3-75 Radio(s) Radio with CD...
Page 196 3-76 Instrument Panel Radio with CD and DVD The vehicle may have one of these radios as its audio system. Radios with CD and DVD Radios with CD and DVD have a ® Bose Surround Sound System. Some of its features are explained later in this section under, “Adjusting the Speakers (Balance/Fade)”.
Page 197 Playing the Radio (Power/Volume): Press to turn the system on and off. Turn to increase or decrease the volume. For vehicles with a Rear Entertainment System (RSE), press and hold for more than two seconds to turn off the entire radio and RSE system and to start the parental control feature.
Page 198 3-78 Instrument Panel Finding a Station BAND: Press to switch between AM, FM, or XM. The selection displays. (Tune): Turn to select radio stations. © ¨ SEEK : Press to go to the previous or to the next station and stay there. To scan stations, press and ©...
Page 199 To setup the number of favorites pages: 1. Press MENU to display the radio setup menu. 2. Press the pushbutton located below the FAV 1-6 label. 3. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers.
Page 200 3-80 Instrument Panel To quickly adjust bass, midrange, or treble to the middle position, press the pushbutton positioned under the BASS, MID, or TREB label for more than two seconds. A beep sounds and the level adjusts to the middle position.
Page 201 Finding a Category (CAT) Station CAT (Category): The CAT button is used to ﬁnd XM™ stations when the radio is in the XM mode. To ﬁnd XM channels within a desired category: 1. Press BAND until the XM frequency displays. 2.
Page 202 3-82 Instrument Panel Radio Messages Calibration Error: The audio system has been calibrated for the vehicle from the factory. If Calibration Error displays, it means that the radio has not been conﬁgured properly for the vehicle and it must be returned to your dealer/retailer for service.
Page 203 See Rear Seat Audio (RSA) on page 3-123 for more information. The DVD/CD decks, (upper slot is the DVD deck and the lower slot is the CD deck) of the radio are compatible with most audio CDs, CD-R, CD-RW, and MP3/WMAs. When a CD is inserted, the text label DVD or CD symbol displays on the left side of the radio display.
Page 204 3-84 Instrument Panel EJECT or CD (Eject): Press and release to eject the disc that is currently playing. A CD ejecting from a radio with CD and DVD, ejects from the bottom slot. A beep sounds and Ejecting Disc displays. Once the disc is ejected, Remove Disc displays.
Page 205 CD/AUX (CD/Auxiliary): Press to select between CD, or Auxiliary. • When a CD is in the player the CD icon and a message showing the disc and/or track number displays. • If an auxiliary input device is not connected, “No Input Device Found”...
Page 206 3-86 Instrument Panel See “Using the Auxiliary Input Jack(s)” later in this section, or “Audio/Video (A/V) Jacks” under, Rear Seat Entertainment (RSE) System on page 3-114 for more information. In some vehicles, depending on audio options, the rear speakers can be muted when the RSA power is turned on.
Page 207 Using the DVD Player The DVD player can be controlled by the buttons on the remote control, the RSA system, or by the buttons on the radio faceplate. See “Remote Control”, under Rear Seat Entertainment (RSE) System on page 3-114 and Rear Seat Audio (RSA) on page 3-123 for more information.
Page 208 3-88 Instrument Panel DVD-V (Video) Display Buttons Once a DVD-V is inserted, the radio display menu shows several icons. Press the pushbuttons located under any desired icon during DVD playback. See the icon list below for more information. The rear seat passenger can navigate the DVD-V menus and controls through the remote control.
Page 209 DVD-A (Audio) Display Buttons Once a DVD-A is inserted, the radio display menu shows several icons. Press the pushbuttons located under any desired icon during DVD playback. See the icon list below for more information. The rear seat operator can navigate the DVD-A menus and controls through the remote control.
Page 210 3-90 Instrument Panel Stopping and Resuming Playback To stop playing a DVD without turning off the system, do one of the following: • Press on the remote control. • Press the pushbutton located under the stop or the play/pause icons displayed on the radio. •...
Page 211 Using the Auxiliary Input Jack The radio system has an auxiliary input jack located on the lower right side of the faceplate. This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary input device such as an iPod, laptop computer, MP3 player, CD player, or cassette tape player, etc.
Page 212: Using An Mp3 (Radio With Cd)
3-92 Instrument Panel If a disc is inserted into top DVD slot, the rear seat operator can turn on the video screen and use the remote control to only navigate the CD tracks through the remote control. See “Using the Auxiliary Input Jack(s)”...
Page 213 • The CD player is able to read and play a maximum of 50 folders, 15 playlists, and a combined total of 512 folders and ﬁles. • Create a folder structure that makes it easy to ﬁnd songs while driving. Organize songs by albums using one folder for each album.
Page 214 3-94 Instrument Panel Empty Directory or Folder If a root directory or a folder exists somewhere in the ﬁle structure that contains only folders/subfolders and no compressed ﬁles directly beneath them, the player advances to the next folder in the ﬁle structure that contains compressed audio ﬁles.
Page 215 Playing an MP3/WMA Insert a CD-R or CD-RW disc partway into the slot label side up. The player pulls it in, and the CD-R or CD-RW should begin playing. EJECT: Press to eject the disc. (Tune): Turn to select MP3/WMA ﬁles on the CD-R or CD-RW currently playing.
Page 216: Using An Mp3 (Radio With Cd And Dvd Player)
3-96 Instrument Panel (Music Navigator): Use the music navigator feature to play MP3/WMA ﬁles on the CD-R or CD-RW in order by artist or album. Press the pushbutton located below the music navigator label. The player scans the disc to sort the ﬁles by artist and album ID3 tag information.
Page 217 MP3/WMA Format To create an MP3/WMA disc on a personal computer: • Make sure the MP3/WMA ﬁles are recorded on a CD-R or CD-RW disc. • Do not mix standard audio and MP3/WMA ﬁles on one disc. • The CD player (lower slot) is able to read and play a maximum combination of 512 ﬁles and folders.
Page 218 3-98 Instrument Panel No Folder When the CD-R or CD-RW disc contains only compressed ﬁles, the ﬁles are located under the root folder. The next and previous folder function does not function on a CD-R or CD-RW that was recorded without folders or playlists. When displaying the name of the folder the radio displays ROOT.
Page 219 Playing an MP3/WMA (In Either the DVD or CD Slot) Insert a CD-R or CD-RW disc partway into either the top or bottom slot, label side up. The player pulls it in, and the CD-R or CD-RW should begin playing. Depending on the format of the disc, a softkey menu appears and allows navigation of the disc.
Page 220 3-100 Instrument Panel © ¨ SEEK : Press the left SEEK arrow to go to the start of the current MP3/WMA ﬁle, if more than ﬁve seconds have played. If less than ﬁve seconds have played, the previous MP3/WMA ﬁle plays.
Page 221 Once the disc has been scanned, the player defaults to playing MP3/WMA ﬁles in order by artist. The current artist playing is shown on the second line of the display between the arrows. To listen to MP3/WMA ﬁles by another artist, press the pushbutton located below either arrow button.
Page 222: Xm Radio Messages
3-102 Instrument Panel XM Radio Messages XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-XMXM (9696). XM Updating: The encryption code in the receiver is being updated, and no action is required. This process should take no longer than 30 seconds.
Page 223: Navigation/Radio System
Unknown: If this message is received when tuned to channel 0, there could be a receiver fault. Consult with your dealer/retailer. Check XM Receivr: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer/retailer.
Page 224 3-104 Instrument Panel Bluetooth Controls Use the buttons located on the steering wheel to operate the in-vehicle Bluetooth system. See Audio Steering Wheel Controls on page 3-125 for more information. (Push To Talk): Press to answer incoming calls, to conﬁrm system information, and to start speech recognition.
Page 225 5. The system prompts for a name for the phone. Use a name that best describes the phone. This name will be used to indicate which phone is connected. The system then conﬁrms the name provided. 6. The system responds with “<Phone name>...
Page 226 3-106 Instrument Panel Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve phone numbers: • Store •...
Page 227 Using the Digit Store Command The digit store command allows a phone number to be stored by entering the digits individually. 1. Press and hold two seconds. The system responds with “Ready” followed by a tone. 2. Say “Digit Store”. The system responds with “Please say the ﬁrst digit to store”...
Page 228 3-108 Instrument Panel Using the Delete Command The delete command allows speciﬁc name tags to be deleted. To use the delete command: 1. Press and hold two seconds. The system responds with “Ready” followed by a tone. 2. Say “Delete”. The system responds with “Delete, please say the name tag”...
Page 229 3. Say the entire number without pausing. • If the system recognizes the number, it responds with “OK, Dialing” and dials the number. • If the system does not recognize the number, it conﬁrms the numbers followed by a tone. If the number is correct, say “Yes”.
Page 230 3-110 Instrument Panel Using the Call Command 1. Press and hold two seconds. The system responds with “Ready” followed by a tone. 2. Say “Call”. The system responds with “Call using <phone name>. Please say the name tag” followed by a tone. 3.
Page 231 Three-Way Calling Three-Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press The system responds with “Ready” followed by a tone. 2. Say “Three-way call”. The system responds with “Three-way call, please say dial or call”.
Page 232 3-112 Instrument Panel Voice Pass-Thru Voice Pass-Thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturers user guide to see if the cell phone supports this feature. This feature can be used to verbally access contacts stored in the cell phone.
Page 233 Sending a Stored Name Tag During a Call 1. Press . The system responds with “Ready” followed by a tone. 2. Say “Send name tag.” The system responds with “Say a name tag to send tones” followed by a tone. 3.
Page 234: Rear Seat Entertainment (Rse) System
3-114 Instrument Panel Rear Seat Entertainment (RSE) System The vehicle may have a DVD Rear Seat Entertainment (RSE) system. The RSE system works with the vehicle’s audio system. The DVD player is part of the front radio. The RSE system includes a radio with a DVD player, a video display screen, audio/video jacks, two wireless headphones, and a remote...
Page 235 The wireless headphones have an On/Off button, channel 1/2 switch, and a volume control. Switch the headphones to Off when not in use. Push the power button to turn on the headphones. An indicator light located on the headphones comes on.
Page 236 3-116 Instrument Panel Battery Replacement To change the batteries on the headphones: 1. Turn the screw to loosen the battery door located on the left side of the headphones. Slide the battery door open. 2. Replace the two batteries in the compartment.
Page 237 How to Change the RSE Video Screen Settings The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from the on screen setup menu by using the remote control. To change a setting: 1.
Page 238 3-118 Instrument Panel Remote Control To use the remote control, aim it at the transmitter window at the rear of the overhead console and press the desired button. Direct sunlight or very bright light could affect the ability of the RSE transmitter to receive signals from the remote control.
Page 239 (Power): Press to turn the video screen on and off. (Illumination): Press to turn the remote control backlight on. The backlight automatically times out after seven to ten seconds if no other button is pressed while the backlight is on. (Title): Press to return the DVD to the main menu of the DVD.
Page 240 3-120 Instrument Panel (Fast Reverse): Press to quickly reverse the DVD or CD. To stop fast reversing a DVD video, press To stop fast reversing a DVD audio or CD, release . This button might not work when the DVD is playing the copyright information or the previews.
Page 241 Problem No power. The picture does not ﬁll the screen. There are black borders on the top and bottom or on both sides or it looks stretched out. In auxiliary mode, the picture moves or scrolls. The remote control does not work. After stopping the player, I push Play but sometimes the DVD starts where I left off and sometimes at...
Page 242 3-122 Instrument Panel Problem Sometimes the wireless headphone audio cuts out or buzzes. I lost the remote and/or the headphones. The DVD is playing, but there is no picture or sound. DVD Display Error Messages The DVD display error message depends on which radio the vehicle has.
Page 243: Rear Seat Audio (Rsa)
Rear Seat Audio (RSA) For vehicles with Rear Seat Audio (RSA), rear seat passengers can listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources. The rear seat passengers can only control the music sources the front seat passengers are not listening to (except on some radios where dual control is allowed).
Page 244 3-124 Instrument Panel (Power): Press to turn the RSA on or off. Volume: Turn to increase or to decrease the volume of the wired headphones. The left knob controls the left headphones and the right knob controls the right headphones. SRCE (Source): Press to select between the radio (AM/FM/XM™), CD, and if the vehicle has these...
Page 245: Theft-Deterrent Feature
When a disc is playing in the CD or DVD changer, press PROG to select the next disc, if multiple discs are loaded. This function is inactive, with some radios, if the front seat passengers are listening to the disc. When a DVD video menu is being displayed, press PROG to perform the ENTER menu function.
Page 246: Radio Reception
3-126 Instrument Panel SRCE (Source): Press to switch between the radio (AM, FM, XM), CD, and for vehicles with, DVD, front auxiliary, and rear auxiliary. For vehicles with the navigation system, press and hold this button for longer than one second to initiate voice recognition.
Page 247: Multi-Band Antenna
Cellular Phone Usage Cellular phone usage may cause interference with the vehicle’s radio. This interference may occur when making or receiving phone calls, charging the phone’s battery, or simply having the phone on. This interference causes an increased level of static while listening to the radio.
Page 248 3-128 Instrument Panel ✍ NOTES...
Page 249: Your Driving, The Road And The Vehicle
Driving Your Vehicle Your Driving, the Road, and the Vehicle Driving for Better Fuel Economy ...4-1 Defensive Driving ...4-2 Drunk Driving ...4-2 Control of a Vehicle ...4-3 Braking ...4-3 Antilock Brake System (ABS) ...4-4 Braking in Emergencies ...4-5 ® System ...4-5 StabiliTrak All-Wheel Drive (AWD) System ...4-7...
Page 250: Driving Your Vehicle
Driving Your Vehicle • Keep vehicle tires properly inﬂated. • Combine several trips into a single trip. • Replace the vehicle’s tires with the same TPC Spec number molded into the tire’s sidewall near the size. • Follow recommended scheduled maintenance.
Page 251: Control Of A Vehicle
Police records show that almost 40 percent of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving. In recent years, more than 17,000 annual motor vehicle-related deaths have been associated with the use of alcohol, with about 250,000 people injured.
Page 252: Antilock Brake System (Abs)
Driving Your Vehicle And, of course, actual stopping distances vary greatly with the surface of the road, whether it is pavement or gravel; the condition of the road, whether it is wet, dry, or icy; tire tread; the condition of the brakes; the weight of the vehicle;...
Page 253: Braking In Emergencies
As the brakes are applied, the computer keeps receiving updates on wheel speed and controls braking pressure accordingly. Remember: ABS does not change the time needed to get a foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, there will not be enough time to apply the brakes if that vehicle...
Page 254 Driving Your Vehicle The system may be heard or felt while it is working. This is normal and does not mean there is a problem with the vehicle. The system should initialize before the vehicle reaches 20 mph (32 km/h). In some cases, it may take approximately two miles (3.2 km) of driving before the system initializes.
Page 255: All-Wheel Drive (Awd) System
It may also be necessary to turn off the system when driving in extreme off-road conditions where high wheel spin is required. See If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow on page 4-16. Traction Control Operation The traction control system is part of the StabiliTrak system.
Page 256: Steering
Driving Your Vehicle When using a compact spare tire on the AWD equipped vehicle, the AWD system automatically detects the presence of the compact spare and the AWD is disabled. To restore the AWD operation and prevent excessive wear on the AWD system, replace the compact spare with a full-size tire as soon as possible.
Page 257: Off-Road Recovery
An emergency like this requires close attention and a quick decision. If holding the steering wheel at the recommended 9 and 3 o’clock positions, it can be turned a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
Page 258: Loss Of Control
4-10 Driving Your Vehicle Loss of Control Let us review what driving experts say about what happens when the three control systems — brakes, steering, and acceleration — do not have enough friction where the tires meet the road to do what the driver has asked.
Page 259: Driving In Rain And On Wet Roads
• Watch for animals. • When tired, pull off the road. • Do not wear sunglasses. • Avoid staring directly into approaching headlamps. • Keep the windshield and all glass on your vehicle clean — inside and out. • Keep your eyes moving, especially during turns or curves.
Page 260: Before Leaving On A Long Trip
4-12 Driving Your Vehicle Hydroplaning Hydroplaning is dangerous. Water can build up under your vehicle’s tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road.
Page 261: Highway Hypnosis
Highway Hypnosis Always be alert and pay attention to your surroundings while driving. If you become tired or sleepy, ﬁnd a safe place to park your vehicle and rest. Other driving tips include: • Keep the vehicle well ventilated. • Keep interior temperature cool.
Page 262: Winter Driving
4-14 Driving Your Vehicle Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 32°F (0°C) when freezing rain begins to fall, resulting in even less traction.
Page 263 CAUTION Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in the snow: •...
Page 264: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
4-16 Driving Your Vehicle If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. See Rocking Your Vehicle to Get It Out on page 4-16.
Page 265 CAUTION Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on the vehicle can break, and it can change the way your vehicle handles.
Page 266 4-18 Driving Your Vehicle Steps for Determining Correct Load Limit Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
Page 267 Example 2 Vehicle Capacity Weight for Example 2 = 1,000 lbs (453 kg). Subtract Occupant Weight 150 lbs (68 kg) × 5 = 750 lbs (340 kg). Available Cargo Weight = 250 lbs (113 kg). Example 3 Vehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg).
Page 268 4-20 Driving Your Vehicle Certiﬁcation/Tire Label Label Example A vehicle speciﬁc Certiﬁcation/ Tire label is attached to the rear edge of the driver’s door. The label shows the gross weight capacity of your vehicle. This is called the Gross Vehicle Weight Rating (GVWR).
Page 269: Towing
CAUTION Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. • Put things in the cargo area of your vehicle. Try to spread the weight evenly. • Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops...
Page 270 4-22 Driving Your Vehicle Dinghy Towing If the vehicle is front-wheel-drive, it can be dinghy towed from the front. These vehicles may also be towed by putting the front wheels on a dolly. See “Dolly Towing” later in this section. If the vehicle is all-wheel-drive, it can be dinghy towed from the front.
Page 271 Notice: If the vehicle is towed without performing each of the steps listed under “Dinghy Towing,” the automatic transmission could be damaged. Be sure to follow all steps of the dinghy towing procedure prior to and after towing the vehicle. Notice: If 65 mph (105 km/h) is exceeded while towing the vehicle, it could be damaged.
Page 272 4-24 Driving Your Vehicle Dolly Towing (Front-Wheel-Drive Vehicles Only) To tow a front-wheel-drive vehicle from the front with two wheels on the ground: 1. Put the front wheels on a dolly. 2. Move the shift lever to P (Park). 3. Set the parking brake. 4.
Page 273: Towing A Trailer
Towing a Trailer CAUTION The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not work well — or even at all.
Page 274 4-26 Driving Your Vehicle Pulling A Trailer Here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving.
Page 275 Vehicle Front-Wheel Drive Front-Wheel Drive, V92 Trailer Towing Package All-Wheel Drive All-Wheel Drive, V92 Trailer Towing Package *The Gross Combination Weight Rating (GCWR) is the total allowable weight of the completely loaded vehicle and trailer including any passengers, cargo, equipment and conversions. The GCWR for the vehicle should not be exceeded.
Page 276 4-28 Driving Your Vehicle After loading the trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they aren’t, adjustments might be made by moving some items around in the trailer. Trailering may also be limited by the vehicle’s ability to carry tongue weight.
Page 277 You may go further and think the tongue weight should be limited to less than 1,000 lbs (454 kg) to avoid exceeding GVWR. But the effect on the rear axle must still be considered. Because the rear axle now weighs 3,100 lbs (1 406 kg), 900 lbs (408 kg) can be put on the rear axle without exceeding RGAWR.
Page 278 4-30 Driving Your Vehicle Safety Chains Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch.
Page 279 Passing More passing distance is needed when towing a trailer. Because the rig is longer, it is necessary to go much farther beyond the passed vehicle before returning to the lane. Backing Up Hold the bottom of the steering wheel with one hand.
Page 280 4-32 Driving Your Vehicle Tow/Haul Mode Tow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. The purpose of the Tow/Haul mode is to: • Reduce the frequency and improve the predictability of transmission shifts when pulling a heavy trailer or a large or heavy load.
Page 281 Parking on Hills CAUTION Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged.
Page 282 4-34 Driving Your Vehicle Basic Trailer Wiring The trailer wiring harness, with a seven-pin connector, is located at the rear of the vehicle and is tied to the vehicle’s frame. The harness connector can be plugged into a seven-pin universal heavy-duty trailer connector available through your dealer/retailer.
Page 283: Service And Appearance Care
Service and Appearance Care Service Service ...5-3 Accessories and Modiﬁcations ...5-3 California Proposition 65 Warning ...5-4 California Perchlorate Materials Requirements ...5-4 Doing Your Own Service Work ...5-4 Adding Equipment to the Outside of the Vehicle ...5-4 Fuel Fuel ...5-5 Gasoline Octane ...5-5 Gasoline Speciﬁcations ...5-5 California Fuel ...5-5 Additives ...5-5...
Page 284 Service and Appearance Care Different Size Tires and Wheels ...5-52 Uniform Tire Quality Grading ...5-52 Wheel Alignment and Tire Balance ...5-54 Wheel Replacement ...5-54 Tire Chains ...5-55 If a Tire Goes Flat ...5-56 Tire Sealant and Compressor Kit ...5-57 Tire Sealant and Compressor Kit Storage ...5-64 Changing a Flat Tire ...5-65 Removing the Spare Tire...
Page 285: Service
Service For service and parts needs, visit your dealer/retailer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: Service and Appearance Care Accessories and Modiﬁcations When non-dealer/non-retailer accessories are added to the vehicle, they can affect vehicle performance and safety, including such things as airbags, braking, stability, ride...
Page 286: California Proposition 65 Warning
Service and Appearance Care California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many ﬂuids, and some component wear by-products contain and/or...
Page 287: Fuel
Fuel Use of the recommended fuel is an important part of the proper maintenance of this vehicle. To help keep the engine clean and maintain optimum vehicle performance, we recommend the use of gasoline advertised as TOP TIER Detergent Gasoline. Gasoline Octane Use regular unleaded gasoline with a posted octane rating of 87 or higher.
Page 288: Fuels In Foreign Countries
Service and Appearance Care For customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by General Motors.
Page 289: Filling The Tank
Filling the Tank CAUTION Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off the engine when you are refueling.
Page 290: Filling A Portable Fuel Container
Service and Appearance Care The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 3-39. If the vehicle has a Driver Information Center (DIC), the TIGHTEN GAS CAP message displays if the fuel cap is not properly installed.
Page 291: Checking Things Under The Hood
Checking Things Under the Hood CAUTION An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. CAUTION Things that burn can get on hot engine parts and start a ﬁre.
Page 292: Engine Compartment Overview
5-10 Service and Appearance Care Engine Compartment Overview When you lift the hood, here is what you will see:...
Page 293: Engine Oil
A. Radiator Pressure Cap. See Cooling System on page 5-17. B. Engine Coolant Recovery Cap. See Cooling System on page 5-17. C. Remote Negative (−) Terminal. See Jump Starting on page 5-29. D. Underhood Fuse Block on page 5-88. E. Remote Positive (+) Terminal. See Jump Starting on page 5-29.
Page 294 5-12 Service and Appearance Care When to Add Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick, add at least one quart/liter of the recommended oil. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Speciﬁcations on page 5-92.
Page 295: Engine Oil Life System
• GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50.
Page 296 5-14 Service and Appearance Care When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. A CHANGE ENGINE OIL SOON message comes on. Change the oil as soon as possible within the next 600 miles (1 000 km).
Page 297: Engine Air Cleaner/Filter
If the vehicle has Driver Information Center (DIC) buttons: 1. Turn the ignition to ON/RUN, with the engine off. 2. Press the vehicle information button until OIL LIFE REMAINING displays. 3. Press and hold the set/reset button until 100% is displayed. Three chimes sound and the CHANGE ENGINE OIL SOON message goes off.
Page 298: Automatic Transmission Fluid
5-16 Service and Appearance Care To inspect or replace the engine air cleaner/ﬁlter: 1. Loosen the screws that hold the cover on. 2. Disconnect the electrical connector. 3. Lift off the cover. 4. Remove the engine air cleaner/ ﬁlter element and any loose debris that may be found in the air cleaner base.
Page 299: Cooling System
The transmission ﬂuid will not reach the end of the dipstick unless the transmission is at operating temperature. If you need to check the transmission ﬂuid level, please take the vehicle to your dealer/retailer. Cooling System The cooling system allows the engine to maintain the correct working temperature.
Page 300 5-18 Service and Appearance Care What to Use CAUTION Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture.
Page 301 Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down.
Page 302 5-20 Service and Appearance Care How to Add Coolant to the Radiator CAUTION An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan.
Page 303 6. Fill the coolant recovery tank to the FULL COLD mark. 7. Reinstall the cap on the coolant recovery tank but leave the radiator pressure cap off. Service and Appearance Care 8. Start the engine and let it run until the upper radiator hose feels warm.
Page 304: Engine Overheating
5-22 Service and Appearance Care Engine Overheating The vehicle has several indicators to warn of engine overheating. There is an engine coolant temperature gage on the instrument panel cluster. See Engine Coolant Temperature Gage on page 3-38. The vehicle may also display an ENGINE OVERHEATED IDLE ENGINE and ENGINE OVERHEATED STOP ENGINE...
Page 305: Overheated Engine Protection Operating Mode
If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: •...
Page 306: Power Steering Fluid
5-24 Service and Appearance Care Power Steering Fluid The power steering ﬂuid reservoir is located toward the front of the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview on page 5-10 for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check power steering ﬂuid unless...
Page 307: Brakes
Adding Washer Fluid When the windshield washer ﬂuid reservoir is low, a WASHER FLUID LOW ADD FLUID message will be displayed on the Driver Information Center (DIC). See DIC Warnings and Messages on page 3-56 for more information. Open the cap with the washer symbol on it.
Page 308 5-26 Service and Appearance Care There are only two reasons why the brake ﬂuid level in the reservoir might go down: • The brake ﬂuid level goes down because of normal brake lining wear. When new linings are installed, the ﬂuid level goes back up.
Page 309: Speciﬁcations
Notice: • Using the wrong ﬂuid can badly damage brake hydraulic system parts. For example, just a few drops of mineral-based oil, such as engine oil, in the brake hydraulic system can damage brake hydraulic system parts so badly that they will have to be replaced.
Page 310: Battery
5-28 Service and Appearance Care Brake Adjustment Every time the brakes are applied, with or without the vehicle moving, the brakes adjust for wear. Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking.
Page 311: Jump Starting
Jump Starting If the vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION Batteries can hurt you. They can be dangerous because: •...
Page 312 5-30 Service and Appearance Care Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty. Always turn off the radio and other accessories when jump starting the vehicle.
Page 313 Do not connect positive (+) to negative (−) or you will get a short that would damage the battery and maybe other parts too. And do not connect the negative (−) cable to the negative (−) terminal on the dead battery because this can cause sparks.
Page 314 5-32 Service and Appearance Care 10. Now start the vehicle with the good battery and run the engine for a while. 11. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service.
Page 315: Headlamp Aiming
Headlamp Aiming Headlamp aim has been preset at the factory and should need no further adjustment. However, if your vehicle is damaged in a crash, the headlamp aim may be affected. Aim adjustment to the low-beam headlamps may be necessary if oncoming drivers ﬂash their high-beam headlamps at you (for vertical aim).
Page 316: Replacement Bulbs
5-34 Service and Appearance Care 3. Remove the two taillamp nut covers. 4. Remove the two nuts holding the taillamp assembly in place. 5. Pull out the taillamp assembly. 6. Turn the bulb socket counterclockwise and pull it straight out to remove it from the taillamp assembly.
Page 317: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 6-3 for more information. Replacement blades come in different types and are removed in different ways. To replace the wiper blade assembly: 1.
Page 318: Tires
5-36 Service and Appearance Care Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer.
Page 319: Tire Sidewall Labeling
Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size The tire size is a combination of letters and numbers used to deﬁne a particular tire’s width, height, aspect ratio, construction...
Page 320 5-38 Service and Appearance Care Compact Spare Tire Example (A) Temporary Use Only The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h).
Page 321: Tire Terminology And Deﬁnitions
Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire The United States version of a metric tire sizing system. The letter P as the ﬁrst character in the tire size means a passenger vehicle tire engineered to standards set by the U.S.
Page 322 5-40 Service and Appearance Care Bead The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. Bias Ply Tire A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread.
Page 323 Maximum Loaded Vehicle Weight The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight number of occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Loading the Vehicle on page 4-16. Occupant Distribution Designated seating positions.
Page 324: Inﬂation - Tire Pressure
5-42 Service and Appearance Care Vehicle Capacity Weight number of designated seating positions multiplied by 150 lbs (68 kg) plus the rated cargo load. See Loading the Vehicle on page 4-16. Vehicle Maximum Load on the Tire Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight.
Page 325: Tire Pressure Monitor System
When to Check Check your tires once a month or more. Do not forget to check the compact spare tire, if the vehicle has one. It should be at 60 psi (420 kPa). For additional information regarding the compact spare tire, see Compact Spare Tire on page 5-77.
Page 326 5-44 Service and Appearance Care As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is signiﬁcantly under-inﬂated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inﬂate...
Page 327: Tire Pressure Monitor Operation
Vehicles with TPMS operate on a radio frequency and comply with RSS-210 of Industry and Science Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device.
Page 328 5-46 Service and Appearance Care A Tire and Loading Information label, attached to your vehicle, shows the size of your vehicle’s original equipment tires and the correct inﬂation pressure for your vehicle’s tires when they are cold. See Loading the Vehicle on page 4-16, for an example of the Tire and Loading Information label and its location on your...
Page 329 • One or more TPMS sensors are missing or damaged. The DIC message and the TPMS malfunction light should go off when the TPMS sensors are installed and the sensor matching process is performed successfully. See your dealer/ retailer for service. •...
Page 330: Tire Inspection And Rotation
5-48 Service and Appearance Care The TPMS sensor matching process is outlined below: 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons at the same time for approximately ﬁve seconds.
Page 331 Any time you notice unusual wear, rotate the tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 5-50 and Wheel Replacement on page 5-54. When rotating the vehicle’s tires, always use the correct rotation pattern shown here.
Page 332: When It Is Time For New Tires
5-50 Service and Appearance Care When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions inﬂuence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when the tires have only 1/16 inch...
Page 333 GM’s exclusive TPC Spec system considers over a dozen critical speciﬁcations that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM’s TPC Spec number is molded onto the tire’s sidewall near the tire size.
Page 334: Different Size Tires And Wheels
5-52 Service and Appearance Care Non-TPC Spec rated tires may give a low-pressure warning that is higher or lower than the proper warning level you would get with TPC Spec rated tires. See Tire Pressure Monitor System on page 5-43. Your vehicle’s original equipment tires are listed on the Tire and Loading Information Label.
Page 335 The grades are molded on the sidewalls of most passenger car tires. The Uniform Tire Quality Grading (UTQG) system does not apply to deep tread, winter-type snow tires, space-saver, or temporary use spare tires, tires with nominal rim diameters of 10 to 12 inches (25 to 30 cm), or to some limited-production tires.
Page 336: Wheel Alignment And Tire Balance
5-54 Service and Appearance Care Excessive speed, underinﬂation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance.
Page 337: Tire Chains
Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. See Changing a Flat Tire on page 5-65 for more information.
Page 338: If A Tire Goes Flat
5-56 Service and Appearance Care If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain the tires properly. See Tires on page 5-36. If air goes out of a tire, It is much more likely to leak out slowly.
Page 339: Tire Sealant And Compressor Kit
Tire Sealant and Compressor Kit CAUTION Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death.
Page 340: Tire Sealant
5-58 Service and Appearance Care This vehicle may have one of the following tire sealant and compressor kits. The kit includes: A. Selector Switch (Sealant/Air or Air Only) B. On/Off Button C. Pressure Gage D. Pressure Deﬂation Button (If equipped) E.
Page 341 Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inﬂate a Punctured Tire Follow the directions closely for correct sealant usage. Service and Appearance Care When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for 5 minutes.
Page 342 5-60 Service and Appearance Care 2. Unwrap the sealant/air hose (F) and the power plug (H). 3. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4.
Page 343 Notice: If the recommended pressure cannot be reached after approximately 25 minutes, the vehicle should not be driven farther. The tire is too severely damaged and the tire sealant and compressor kit cannot inﬂate the tire. Remove the power plug from the accessory power outlet and unscrew the inﬂating hose from the tire valve.
Page 344 5-62 Service and Appearance Care 20. Wipe off any sealant from the wheel, tire, and vehicle. 21. Dispose of the used sealant canister (E) and sealant/air hose (F) assembly at a local dealer/retailer or in accordance with local state codes and practices. 22.
Page 345 4. Remove the tire valve stem cap from the ﬂat tire by turning it counterclockwise. 5. Attach the air only hose (G) onto the tire valve stem by turning it clockwise until it is tight. 6. Plug the power plug (H) into the accessory power outlet in the vehicle.
Page 346: Tire Sealant And Compressor Kit Storage
5-64 Service and Appearance Care 14. Replace the air only hose (G) and the power plug (H) and cord back in its original location. 15. Place the equipment in the original storage location in the vehicle. The tire sealant and compressor kit has an accessory adapter located in a compartment on the bottom of its housing that may be used to...
Page 347: Changing A Flat Tire
Changing a Flat Tire If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning ﬂashers. See Hazard Warning Flashers on page 3-5. CAUTION Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people.
Page 348: Removing The Spare Tire And Tools
5-66 Service and Appearance Care Removing the Spare Tire and Tools The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, located toward the rear of the vehicle, and pulling the...
Page 349 1. Open the storage compartment door of the convenience center that is nearest the liftgate and remove the cap on the bottom of the storage compartment. 2. Open the carpet cutout that is located through the hole of the storage compartment. 3.
Page 350: Removing The Flat Tire And Installing The Spare Tire
5-68 Service and Appearance Care Do the following to check the cable: 1. Check under the vehicle to see if the cable is visible. 2. If it is not visible, see Secondary Latch System on page 5-72. If it is visible, ﬁrst try to tighten the cable by turning the lug wrench clockwise until you hear two clicks or feel it skip twice.
Page 351 4. To identify the appropriate jacking location, ﬁnd the triangle (A) about 12 inches (30.5 cm) from the front tire or (B) about 10.5 inches (27 cm) from the rear tire. The triangle is located near each wheel on the vehicle’s exterior. Notice: If a jack is used to raise the vehicle without positioning it correctly, the vehicle could be...
Page 352 5-70 Service and Appearance Care 9. Remove the plastic spare tire heat shield by pulling the rubber latch. Store the plastic spare tire heat shield. See Storing a Flat or Spare Tire and Tools on page 5-74 for more information. CAUTION Rust or dirt on a wheel, or on the parts to which it is fastened, can...
Page 353 12. Put the nuts on by hand by turning the clockwise until the wheel is held against the mounting surface. Make sure the rounded end is toward the wheel. 13. Lower the vehicle by attaching the lug wrench to the jack and turning the wrench counterclockwise.
Page 354: Secondary Latch System
5-72 Service and Appearance Care Secondary Latch System This vehicle has an underbody mounted tire hoist assembly that has a secondary latch system. It is designed to stop the compact spare tire from suddenly falling off the vehicle if the cable holding the spare tire is damaged.
Page 355 5. Turn the lug wrench clockwise to raise the jack until it lifts the secondary latch spring. 6. Keep raising the jack until the spare tire stops moving upward and is held ﬁrmly in place. This lets you know that the secondary latch has released and the spare tire is balancing on the jack.
Page 356: Storing A Flat Or Spare Tire And Tools
5-74 Service and Appearance Care Storing a Flat or Spare Tire and Tools Storing the Spare Tire CAUTION The underbody-mounted spare tire needs to be stored with the valve stem pointing down. If the spare tire is stored with the valve stem pointing upwards, the secondary latch will not work properly and the spare tire could loosen and...
Page 357 6. Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the lug wrench to tighten the cable. Storing the Flat Tire 1. Remove the cable package from the jack storage area.
Page 358 5-76 Service and Appearance Care 8. Make sure the metal tube is centered at the striker. Push the tube toward the front of the vehicle. 9. Close the liftgate and make sure it is latched properly. Storing the Tools A. Tool Bag B.
Page 359: Compact Spare Tire
Compact Spare Tire CAUTION Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time.
Page 360: Appearance Care Interior Cleaning
5-78 Service and Appearance Care Appearance Care Interior Cleaning The vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on the upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces. Regular vacuuming is recommended to remove particles from the upholstery.
Page 361: Fabric/Carpet
Do not clean the vehicle using: • A knife or any other sharp object to remove a soil from any interior surface. • A stiff brush. It can cause damage to the vehicle’s interior surfaces. • Heavy pressure or aggressive rubbing with a cleaning cloth.
Page 362: Leather
5-80 Service and Appearance Care Leather A soft cloth dampened with water can be used to remove dust. If a more thorough cleaning is necessary, a soft cloth dampened with a mild soap solution can be used. Allow the leather to dry naturally.
Page 363: Weatherstrips
Weatherstrips Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather frequent application may be required. See Recommended Fluids and Lubricants on page 6-12. Washing Your Vehicle The best way to preserve the vehicle’s ﬁnish is to keep it clean by...
Page 364: Windshield, Backglass, And Wiper Blades
5-82 Service and Appearance Care If the vehicle has a basecoat/ clearcoat paint ﬁnish, the clearcoat gives more depth and gloss to the colored basecoat. Always use waxes and polishes that are non-abrasive and made for a basecoat/clearcoat paint ﬁnish. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint ﬁnish...
Page 365: Aluminum Or Chrome-Plated Wheels And Trim
Aluminum or Chrome-Plated Wheels and Trim The vehicle may have either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel.
Page 366: Sheet Metal Damage
5-84 Service and Appearance Care Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
Page 367: Vehicle Identiﬁcation Vehicle Identiﬁcation Number (Vin)
Vehicle Identiﬁcation Vehicle Identiﬁcation Number (VIN) This is the legal identiﬁer for the vehicle. It appears on a plate in the front corner of the instrument panel, on the driver side. It can be seen through the windshield from outside the vehicle.
Page 368: Add-On Electrical Equipment
5-86 Service and Appearance Care Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer/retailer ﬁrst. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle’s warranty. Some add-on electrical equipment can keep other components from working as they should.
Page 369 Fuses AIRBAG BCK/UP/ STOP CNSTR/ VENT CTSY DR/LCK DRL 2 DSPLY FRT/WSW HTD/COOL SEAT Fuse Side HVAC Service and Appearance Care Usage Fuses Airbag IADV/ PWR/LED Ampliﬁer INFOTMNT Infotainment Back-up Lamp/Stoplamp LT/TRN/SIG Body Control Module Canister Vent Courtesy Door Locks MODE Daytime Running PWR/MIR...
Page 370: Underhood Fuse Block
5-88 Service and Appearance Care Relay Side Relays Usage LT/PWR/ Driver Side Power SEAT Seat Relay RT/PWR/ Passenger Side SEAT Power Seat Relay Relays Usage PWR/ Power Windows WNDW Relay PWR/ Power Steering COLUMN Column Relay L/GATE Liftgate Relay Power Lock Relay Rear Window REAR/WSW Washer Relay...
Page 371 Fuses Usage Air Conditioning CLUTCH Clutch Antilock Braking ABS MTR System (ABS) Motor Adaptive Forward Lighting System Service and Appearance Care Fuses Usage AIRBAG Airbag System Auxiliary Power POWER AUX VAC Auxiliary PUMP Vacuum Pump 5-89 Fuses Usage All-Wheel-Drive System BATT 1 Battery 1 BATT 2...
Page 372 5-90 Service and Appearance Care Fuses Usage Fuel System Control FSCM Module HORN Horn HTD WASH Heated Windshield Washer Fluid Heated Outside HTD MIR Rearview Mirror Heating, Ventilation HVAC and Air Conditioning BLWR Blower LT HI Left High-Beam BEAM Headlamp LT LO Left Low-Beam BEAM...
Page 373 Fuses Usage TRLR BRK Trailer Brake TRLR PRK Trailer Parking LAMP Lamps TRLR PWR Trailer Power WPR/WSW Windshield Wiper/Washer Relays Usage Air Conditioning CMPRSR Compressor Clutch CLTCH AUX VAC Auxiliary Vacuum PUMP Pump CRNK Switched Power FAN 1 Cooling Fan 1 FAN 2 Cooling Fan 2 FAN 3...
Page 374: Capacities And Speciﬁcations
5-92 Service and Appearance Care Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 6-12 for more information. Application Air Conditioning Refrigerant R134a Cooling System Engine Oil with Filter Fuel Tank Transmission Fluid* Wheel Nut Torque...
Page 375: Maintenance Requirements
Maintenance Schedule Maintenance Schedule Introduction ...6-1 Maintenance Requirements ...6-1 Your Vehicle and the Environment ...6-1 Using the Maintenance Schedule ...6-2 Scheduled Maintenance ...6-3 Additional Required Services ...6-6 Maintenance Footnotes ...6-7 Owner Checks and Services ...6-9 At Each Fuel Fill ...6-9 At Least Once a Month ...6-9 At Least Once a Year ...6-10 Recommended Fluids and...
Page 376: Using The Maintenance Schedule
Maintenance Schedule Improper ﬂuid levels or the wrong tire inﬂation can increase the level of emissions from the vehicle. To help protect the environment, and to keep the vehicle in good condition, be sure to maintain the vehicle properly. Using the Maintenance Schedule We want to help keep this vehicle in good working condition.
Page 377: Scheduled Maintenance
To purchase service information, see Service Publications Ordering Information on page 7-15. Owner Checks and Services on page 6-9 tells what should be checked, when to check it, and what can easily be done to help keep the vehicle in good condition. The proper replacement parts, ﬂuids, and lubricants to use are listed in Recommended Fluids and...
Page 378 Maintenance Schedule Maintenance I — Use Maintenance I if the CHANGE ENGINE OIL SOON message displays within 10 months since the vehicle was purchased or Maintenance II was performed. Change engine oil and ﬁlter. See Engine Oil on page 5-11. Reset oil life system.
Page 379 Inspect brake system. See footnote (a). Check engine coolant and windshield washer ﬂuid levels and add ﬂuid as needed. Perform any needed additional services. See “Additional Required Services” in this section. Inspect suspension and steering components. See footnote (b). Inspect engine cooling system. See footnote (c). Inspect wiper blades.
Page 380: Additional Required Services
Maintenance Schedule Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
Page 381: Maintenance Footnotes
Service and Miles (Kilometers) Engine cooling system service (or every ﬁve years, whichever occurs ﬁrst). An Emission Control Service. See footnote (i). Inspect engine accessory drive belt. An Emission Control Service. See footnote (k). Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chaﬁng, etc.
Page 382 Maintenance Schedule (e) Make sure the safety belt reminder light and safety belt assemblies are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 383: Owner Checks And Services
Owner Checks and Services These owner checks and services should be performed at the intervals speciﬁed to help ensure vehicle safety, dependability, and emission control performance. Your dealer/ retailer can assist with these checks and services. Be sure any necessary repairs are completed at once.
Page 384: At Least Once A Year
6-10 Maintenance Schedule At Least Once a Year Starter Switch Check CAUTION When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle.
Page 385 Parking Brake and Automatic Transmission P (Park) Mechanism Check CAUTION When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll.
Page 386: Recommended Fluids And Lubricants
6-12 Maintenance Schedule Recommended Fluids and Lubricants Fluids and lubricants identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer/retailer. Usage Engine Oil Engine Coolant Hydraulic Brake System Windshield Washer Power Steering System Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certiﬁed for Gasoline Engines starburst symbol.
Page 387 Maintenance Schedule 6-13 Usage Fluid/Lubricant ® Automatic Transmission DEXRON -VI Automatic Transmission Fluid. Multi-Purpose Lubricant, Superlube (GM Part No. U.S. 12346241, Key Lock Cylinders in Canada 10953474). Carrier Assembly — Differential SAE 75W-90 Synthetic Axle Lubricant (GM Part No. U.S. 89021677 (Rear Drive Module) and Transfer in Canada 89021678) meeting GM Speciﬁcation 9986115.
Page 388: Maintenance Replacement Parts
6-14 Maintenance Schedule Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer/retailer. Part Engine Air Cleaner/Filter Engine Oil Filter Spark Plugs Wiper Blades Front Driver – 24.6 in (62.5 cm) Front Passenger –...
Page 389: Engine Drive Belt Routing
Maintenance Schedule 6-15 Engine Drive Belt Routing 3.6L V6 Engine...
Page 390: Maintenance Record
6-16 Maintenance Schedule Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-1. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages. You should retain all maintenance receipts.
Page 391 Maintenance Schedule 6-17 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 392 6-18 Maintenance Schedule Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 393: Customer Assistance Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer’s sales or service departments. Sometimes,...
Page 394: Customer Assistance And Information
U.S., call the Chevrolet Customer Assistance Center at 1-800-222-1020. In Canada, call General Motors of Canada Customer Communication Centre at 1-800-263-3777 (English), or 1-800-263-7854 (French).
Page 395: Online Owner Center
— all in one convenient place. • Digital owner manual, warranty information, and more • Online service and maintenance records • Find Chevrolet dealers for service nationwide • Exclusive privileges and offers • Recall notices for your speciﬁc vehicle ® •...
Page 396: Customer Assistance For Text Telephone (Tty) Users
Customer Assistance Information Other Helpful Links: Chevrolet — www.chevrolet.com Chevrolet Merchandise — www.chevymall.com Help Center — www.chevrolet.com/ helpcenter • • Contact Us My GM Canada (Canada) — www.gm.ca My GM Canada is a password-protected section of www.gm.ca where you can save...
Page 397: Customer Assistance Offices
Customer Assistance Offices Chevrolet encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Chevrolet, the letter should be addressed to: United States — Customer Assistance Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.
Page 398: Gm Mobility Reimbursement Program
Customer Assistance Information GM Mobility Reimbursement Program This program, available to qualiﬁed applicants, can reimburse you up to $1,000 of the cost of eligible aftermarket adaptive equipment required for your vehicle, such as hand controls or a wheelchair/ scooter lift. The offer is available for a very limited period of time from the date of vehicle purchase/lease.
Page 399 Roadside Assistance is not a part of the New Vehicle Limited Warranty. Chevrolet and General Motors of Canada Limited reserve the right to make any changes or discontinue the Roadside Assistance program at any time without notiﬁcation.
Page 400: Scheduling Service Appointments
Customer Assistance Information Services Not Included in Roadside Assistance • Impound towing caused by violation of any laws. • Legal ﬁnes. • Mounting, dismounting or changing of snow tires, chains, or other traction devices. • Towing or services for vehicles driven on a non-public road or highway.
Page 401: Courtesy Transportation
If your vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety-related. If it is, please call your dealership/retailer, let them know this, and ask for instructions.
Page 402: Collision Damage Repair
7-10 Customer Assistance Information Courtesy Rental Vehicle Your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle that you obtain if your vehicle is kept for an overnight warranty repair. Rental reimbursement will be limited and must be supported by original receipts.
Page 403 Recycled original equipment parts may also be used for repair. These parts are typically removed from vehicles that were total losses in prior crashes. In most cases, the parts being recycled are from undamaged sections of the vehicle. A recycled original equipment GM part, may be an acceptable choice to maintain your vehicle’s originally designed appearance and safety...
Page 404 7-12 Customer Assistance Information If a Crash Occurs Here is what to do if you are involved in a crash. • Check to make sure that you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured.
Page 405 • Choose a reputable collision repair facility for your vehicle. Whether you select a dealer/ retailer or a private collision repair facility to ﬁx the damage, make sure you are comfortable with them. Remember, you will have to feel comfortable with their work for a long time.
Page 406: Reporting Safety Defects
General Motors In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify General Motors. Call 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 33170 Detroit, MI 48232-5170 In Canada, call 1-800-263-3777...
Page 407: Service Publications Ordering Information
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Service Bulletins Service Bulletins give additional technical service information needed to knowledgeably service General Motors cars and trucks. Each bulletin contains instructions to assist in the diagnosis and service of your vehicle.
Page 408: Vehicle Data Recording And Privacy
7-16 Customer Assistance Information Vehicle Data Recording and Privacy Your GM vehicle has a number of sophisticated computers that record information about the vehicle’s performance and how it is driven. For example, your vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy airbags in a crash and, if...
Page 409: Onstar
GM will not access this data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee; in response to an official request of police or similar government office;...
Page 410 7-18 Customer Assistance Information ✍ NOTES...
Page 411 Accessories and Modiﬁcations ... 5-3 Accessory Power ... 2-22 Accessory Power Outlets ... 3-17 Adding Equipment to Your Airbag-Equipped Vehicle ... 1-58 Additional Required Services, Scheduled Maintenance ... 6-6 Additives, Fuel ... 5-5 Add-On Electrical Equipment ... 5-86 Air Cleaner/Filter, Engine ... 5-15 Air Conditioning ...
Page 412 INDEX Battery ... 5-28 Electric Power Management ... 3-15 Run-Down Protection ... 3-16 Belt Routing, Engine ... 6-15 Blind Spot Mirrors ... 2-34 ® Bluetooth ... 3-103 Brake Emergencies ... 4-5 Brake Fluid ... 5-25 Brakes ... 5-25 Antilock ... 4-4 Parking ...
Page 413 Cleaning (cont.) Instrument Panel, Vinyl, and Other Plastic Surfaces ... 5-80 Interior ... 5-78 Leather ... 5-80 Tires ... 5-83 Underbody Maintenance ... 5-84 Washing Your Vehicle ... 5-81 Weatherstrips ... 5-81 Windshield, Backglass, and Wiper Blades ... 5-82 Climate Control System ... 3-19 Outlet Adjustment ...
Page 414 INDEX Driver Seat Height Adjuster ... 1-3 Driver Information Center (DIC) ... 3-44 DIC Operation and Displays ... 3-45, 3-51 DIC Vehicle Customization ... 3-65 DIC Warnings and Messages ... 3-56 Driving At Night ... 4-10 Before a Long Trip ... 4-12 Defensive ...
Page 415 Filter Engine Air Cleaner ... 5-15 Finish Damage ... 5-84 Flashers, Hazard Warning ... 3-5 Flash-to-Pass ... 3-7 Flat Tire ... 5-56 Flat Tire, Changing ... 5-65 Flat Tire, Storing ... 5-74 Floor Mats ... 2-54 Fluid Automatic Transmission ... 5-16 Power Steering ...
Page 416 INDEX Hood Checking Things Under ... 5-9 Release ... 5-9 Horn ... 3-5 How to Wear Safety Belts Properly ... 1-17 Ignition Positions ... 2-21 Infants and Young Children, Restraints ... 1-29 Inﬂation - Tire Pressure ... 5-42 Instrument Panel Brightness ...
Page 417 Locks (cont.) Power Door ... 2-8 Programmable Automatic Door Locks ... 2-9 Rear Door Security Locks ... 2-9 Loss of Control ... 4-10 Lower Anchors and Tethers for Children ... 1-35 Luggage Carrier ... 2-54 Lumbar Manual Controls ... 1-4 Power Controls ...
Page 418 INDEX Outside Convex Mirror ... 2-35 Heated Mirrors ... 2-35 Power Foldaway Mirrors ... 2-33 Power Mirrors ... 2-32 Overheated Engine Protection Operating Mode ... 5-23 Owner Checks and Services ... 6-9 Owners, Canadian ... ii Paint, Damage ... 5-84 Parade Dimming ...
Page 419 Rearview Mirror, Automatic Dimming ... 2-31 Rearview Mirrors ... 2-31 Reclining Seatbacks ... 1-8 Recommended Fluids and Lubricants ... 6-12 Recreational Vehicle Towing ... 4-21 Reimbursement Program, GM Mobility ... 7-6 Remote Keyless Entry (RKE) System ... 2-3 Remote Keyless Entry (RKE) System, Operation ...
Page 420 i-10 INDEX Secondary Latch System ... 5-72 Securing a Child Restraint Rear Seat Position ... 1-41 Right Front Seat Position ... 1-43 Security Light ... 3-43 Service ... 5-3 Accessories and Modiﬁcations ... 5-3 Adding Equipment to the Outside of the Vehicle ... 5-4 Doing Your Own Work ...
Page 421 Tire Sealant and Compressor Kit ... 5-64 Tires ... 5-36 Aluminum or Chrome-Plated Wheels, Cleaning ... 5-83 Buying New Tires ... 5-50 Chains ... 5-55 Changing a Flat Tire ... 5-65 Cleaning ... 5-83 Compact Spare ... 5-77 Different Size ... 5-52 If a Tire Goes Flat ...
Page 422 i-12 INDEX Ventilation Adjustment ... 3-27 Visors ... 2-16 Voltage Devices, and Wiring ... 5-85 Voltmeter Gage ... 3-35 Warning Lights, Gages, and Indicators ... 3-30 Warnings DIC Warnings and Messages ... 3-56 Hazard Warning Flashers ... 3-5 Safety and Symbols ... iii Wheels Alignment and Tire Balance ...

Chevrolet 2009 Traverse Owner's Manual

Table of Contents

Index

Seats and Restraint System

Features and Controls

Table of Contents

Instrument Panel

Maintenance Schedule

Driver Information

Driving Your Vehicle 4-1

Your Driving, the Road, and

Driving Your Vehicle

The Vehicle

Towing

5-1 Service and

Service and Appearance Care

Service

Checking Things under the Hood

Windshield Wiper Blade Replacement

Appearance Care Interior Cleaning

Vehicle Identiﬁcation Vehicle Identiﬁcation Number (VIN)

Electrical System High Voltage Devices and Wiring

Capacities and Speciﬁcations

Maintenance Schedule 6-1 Maintenance Maintenance Maintenance Requirements Schedule Schedule

Quick Links

Chapters

Related Manuals for Chevrolet 2009 Traverse

Summary of Contents for Chevrolet 2009 Traverse