Preparing For Connection; For Wireless Module Aj-Wm30/Aj-Wm50 - Panasonic PX380G-BS300 Operating Instructions Manual

Preparing for connection

For wireless module AJ-WM30/AJ-WM50

Connect the wireless module AJ-WM30/AJ-WM50 (optional) to the camera.
1
Open the cover. (Fig. 1)
2
Remove the wireless module fixing part from the camera. (Fig. 2)
The wireless module fixing part is secured with a screw.
3
Securely attach the wireless module to the <USB2.0> terminal (sub-host). (Fig. 3)
4
(AJ-WM50 only) Place the module holder under the wireless module. (Fig. 4)
f Mount the cap of the wireless module to the hole of the module holder.
5
Fix the wireless module fixing part removed in Step 2 with a screw. (Fig. 4)
6
Close the cover.
@
NOTE
t When removing the wireless module, pull it down straight.
t When connected with the wireless LAN, attach the wireless module securely and close the cover.
t When using a wireless module other than AJ-WM30/AJ-WM50, refer to "For wireless module other than AJ-WM30/AJ-WM50" (page 195).
Cautions when using wireless module AJ-WM30/AJ-WM50
Read the operating manual of the wireless module thoroughly and understand it before using.
For the latest information, visit the following website:
https://pro-av.panasonic.net/
Chapter 10 Network Connection — Preparing for connection
Fig. 1
Fig. 3
Wireless module fixing part
Fig. 2
Wireless module fixing part
Fig. 4
– 194 –