Table of Contents
Advertisement
Setting
Operation mode
Interval recording
One-shot recording
Loop recording
Standard recording
SDI input recording
Setting
Operation mode
Interval recording
One-shot recording
Loop recording
Standard recording
SDI input recording
* It is not available when [LINE&FREQ] is [480-59.94i] or [576-50i].
Selecting video output
The video output method can be selected.
Video output can be selected, for example, in the setting menus and SmartUI.
The setting of the <SDI OUT2/IN> terminal can be switched using the main menu → [IN/OUT SEL] → [SDI OUT2/IN SEL]. The setting of the <GL IN/
VIDEO OUT> terminal can be switched using the main menu → [IN/OUT SEL] → [GL IN/VIDEO OUT SEL].
Setting item
[SDI2]
([SET02:MON OUT SELECT] screen of SmartUI)
[SETUP] (Main menu → [SYSTEM MODE])
[D.CON]
([SET02:MON OUT SELECT] screen of SmartUI)
Selecting video output from each terminal
Describes the status of the video output when [MON] is set in the main menu → [IN/OUT SEL] → [HDMI OUT SIGNAL].
Monitor output setting
([SET02:MON OUT SELECT]
screen of SmartUI) *
[LINE&FREQ]
[SDI2]
[1080i]
[1080-59.94P]
[480i]
[1080i]
[1080-59.94i]
[480i]
[1080i]
[1080-23.98PsF]
[480i]
[720P]
[720-59.94P]
[480i]
[480-59.94i]
[480i]
[1080i]
[1080-50P]
[576i]
[1080i]
[1080-50i]
[576i]
[720P]
[720-50P]
[576i]
[576-50i]
[576i]
*1
[SDI2] and [HDMI] are interlocked.
*2
1080/59.94P and 1080/50P can be output from only the <SDI OUT1> terminal.
Chapter 4 Shooting — Multi formats
Recording setting (setting menu)
[REC SIGNAL]
[RECORDING]
[CAM]
[CAM]
[CAM]
[CAM]
[SDI]
Recording setting (setting menu)
[REC SIGNAL]
[RECORDING]
[CAM]
[CAM]
[CAM]
[CAM]
[SDI]
Select the SDI output signal format from the <SDI OUT2/IN> terminal.
The output signal format from the <HDMI> terminal is determined linked to this when the main
menu → [IN/OUT SEL] → [HDMI OUT SIGNAL] is set to [MON].
Select the setup level of the signal (composite) to output to the <GL IN/VIDEO OUT> terminal.
f [0%]: 0% setup for both output and recording
f [7.5%A]: 7.5% setup for output only (recording 0%)
The [SETUP] menu setting is valid also at playback.
Select the screen type at down-conversion output (composite and SD SDI output) in the HD
mode (1080P, 1080i, 720P).
1
[HDMI]
<SDI OUT1> terminal
[1080i]
1080/59.94P*
[480P]
[1080i]
1080/59.94i
[480P]
[1080i]
1080/23.98PsF
[480P]
[720P]
720/59.94P
[480P]
[480P]
480/59.94i
[1080i]
1080/50P*
[576P]
[1080i]
1080/50i
[576P]
[720P]
720/50P
[576P]
[576P]
576/50i
Pre-recording
[INTERVAL]
Not available
[ONE SHOT]
Not available
[LOOP]
Not available
[NORMAL]
Refer to "System modes and recording functions".
Disabled
Not available
Dual codec
recording
[INTERVAL]
Not available
[ONE SHOT]
Not available
[LOOP]
Not available
[NORMAL]
Refer to "System modes and recording functions".
Disabled
Available*
Description of settings
Video output
<SDI OUT2/IN>
terminal
1080/59.94i
2
480/59.94i
1080/59.94i
480/59.94i
1080/23.98PsF over
59.94i 2:3
480/23.98PsF over
59.94i 2:3
720/59.94P
480/59.94i
480/59.94i
1080/50i
2
576/50i
1080/50i
576/50i
720/50P
576/50i
576/50i
– 83 –
Recording/operation enabled/disabled
One-clip
recording
Not available
Not available
Not available
Not available
Recording/operation enabled/disabled
Text memo
Not available
Not available
Not available
Available
<GL IN/VIDEO OUT>
<HDMI> terminal
1080/59.94i
480/59.94P
1080/59.94i
480/59.94P
1080/23.98PsF over
59.94i 2:3
480/23.98PsF over
480/23.98PsF over
59.94i 2:3
720/59.94P
480/59.94P
480/59.94P
1080/50i
576/50P
1080/50i
576/50P
720/50P
576/50P
576/50P
Simultaneous
recording
Not available
Not available
Not available
Available
Shot mark
Not available
Not available
Not available
Available
terminal
480/59.94i
480/59.94i
59.94i 2:3
480/59.94i
480/59.94i
576/50i
576/50i
576/50i
576/50i
Advertisement
Table of Contents
