Table of Contents
Advertisement
Chapter 9 Connecting to External Devices — Connection through the <USB2.0> terminal
Clip thumbnail display of the storage device
Displaying thumbnails
You can display and manage clips saved in a storage device, as well as display the thumbnail screen for clips saved in a P2 card attached to the
camera.
1
Open the explorer screen.
Partitions or folders are displayed in a list.
2
Use the cursor buttons to place the cursor on the partition or folder you want to display on the thumbnail screen, and press the
<SET> button.
This displays the thumbnails of clips in the partition or folder. You can go back to the main explorer screen by clicking the <EXIT> button.
@
NOTE
t When target partitions are selected, you can display thumbnails in all partitions selected as targets by pressing the <SET> button while holding down
the <SHIFT> button.
r Information display items
1 Storage device information
f For [TYPE S]
[SERIAL]: P2 card serial number
[MODEL]: Model name of P2 card
[SELECTED PART.]: Displays a checkmark when a target partition is selected.
[SELECTED PART. NO.]: List of selected partition numbers (only displayed when multiple partitions are selected)
[NO.]: Partition number
[DATE]: Partition record date
[TIME]: Partition record time
[VERIFY]: Verification settings and results during recording, [ON/FAILED]
- [ON/FINISHED]: Verification performed. Items match.
- [ON/FAILED]: Verification performed but no match found. (For [P2STORE], [−−] is displayed.)
- [OFF]: Verification not performed
[NAME]: Partition name defined by the user
[SIZE]: Total capacity of the storage device
[USED]: Used storage device capacity
[FREE CAP.]: Remaining storage device capacity
f For [FAT]
[SELECTED PART.]: Displays a checkmark when a target partition is selected.
[SELECTED PART. NO.]: List of selected folder numbers (only displayed when multiple folders are selected)
[NO.]: Folder number
[DATE]: Folder creation date
[TIME]: Folder creation time
[FOLDER]: Folder name (creation date and time are not displayed in the root folder)
[SIZE]: Total capacity of the storage device
<SET>
<EXIT>
1
– 182 –
Advertisement
Table of Contents
