Panasonic PX380G-BS300 Operating Instructions Manual page 204

2
Configure the network settings of the camera.
1) Select [INTERNAL] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA].
2) Set each item in accordance with the connection destination in the main menu → [NETWORK SETUP] → [STREAMING SETTING].
[SERVER ADDR.]: Sets the IP address of the connection destination.
[RTSP PORT]: Sets the RTSP port number of the connection destination.
@
NOTE
2)
t The content set in Step can be saved on the SD memory card. Insert the SD memory card and select [SAVE (SD CARD)] in the main menu →
[NETWORK SETUP] → [STREAMING SETTING].
Configuring the setting values by directly referring to the setting values contained in the SD memory card
Configure the setting values by directly referring to the setting values contained in the SD memory card without saving it in the camera.
Insert the SD memory card that contains the setting values before turning on the power of the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in the main menu → [NETWORK SETUP] → [NETWORK SEL]. For detail of each connection method, refer to
"Wireless LAN settings" (page 197) or "Wired LAN settings" (page 199).
2
Configure the network settings of the camera.
Select [SD CARD] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA].
@
NOTE
t The setting values of the SD memory card can be saved in following method.
- Select [SAVE (SD CARD)] in the main menu → [NETWORK SETUP] → [STREAMING SETTING].
Configuring the setting values after saving the setting values contained in the SD memory card to the camera
Configure the setting values after saving the setting values contained in the SD memory card to the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in the main menu → [NETWORK SETUP] → [NETWORK SEL]. For detail of each connection method, refer to
"Wireless LAN settings" (page 197) or "Wired LAN settings" (page 199).
2
Configure the network settings of the camera.
1) Select [INTERNAL] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA].
2) Insert the SD memory card containing the setting values and select [LOAD (SD CARD)] in the main menu → [NETWORK SETUP] →
[STREAMING SETTING].
Chapter 10 Network Connection — Network function
– 204 –