Table of Contents
Advertisement
Chapter 9 Connecting to External Devices — Connecting to the remote control unit (AJ-RC10G)
Connecting to the remote control unit (AJ-RC10G)
f Connect the remote control unit AJ-RC10G (optional) to remote-control some functions.
f When you connect AJ-RC10G and set the <POWER> switches of the camera and AJ-RC10G to <ON>, the camera automatically enters the remote
control mode.
f Remove AJ-RC10G, or ensure the AJ-RC10G <POWER> switch is <OFF> to release remote control mode.
f You cannot go to the AJ-RC10G remote control mode when remote control in an IP connection is enabled. Remote control in an IP connection is
enabled when [IP REMOTE] is illuminated or flashing on the [STATUS] screen of the mode check displayed when you turn the <DISP/MODE CHK>
switch to the <CHK> side. Set the camera's main menu → [NETWORK SETUP] → [NETWORK FUNC] → [IP REMOTE] to [DISABLE].
Switch function in remote control mode
The following switches and buttons on the camera do not function in remote control mode.
f <SHUTTER> switch
f <MENU> button
f Jog dial button
f <GAIN> switch
f <OUTPUT>/<AUTO KNEE> selector switch
f <WHITE BAL> switch
f <USER MAIN> button
f <USER1> button
f <USER2> button
Recording and playback operations in remote control mode
Recording/playback operations can be performed both on the camera and AJ-RC10G when the remote control unit is connected.
Remote control mode menu operations
The following menu items of the camera is not available when the remote control unit is connected.
f Main menu → [SCENE FILE] → [RB GAIN CONTROL SETTING]
f Main menu → [SCENE FILE] → [RGB BLACK CONTROL SETTING]
Remote control unit connected to the camera
When AJ-RC10G is connected to the camera, the operations of the following functions differ from the descriptions in the Operating Instructions supplied
with AJ-RC10G.
r <A.KNEE ON> button
You can enable/disable the dynamic range stretcher function from the camera's main menu → [SW MODE] → [AUTO KNEE SW]. The button illuminates
when [DRS] is set, and the light is off when [OFF] is set.
r <CHARA ON> button
Selects whether the characters are superimposed over the video signals output to the <SDI OUT2/IN>, <HDMI>, and <GL IN/VIDEO OUT> terminals of
the camera.
The setting of the [CHR] item in [SET03:MON OUT SETUP] of SmartUI will be disabled.
r <FILTER ND/CC> button, <MATRIX ON> button, <HIGH COLOR ON> button
Operation is not available.
r <USER2> button
Has the same function as the camera's <THUMBNAIL> button.
The thumbnail screen is displayed on the viewfinder and the monitor screen connected to the camera.
[CAMERA MENU OPEN] is displayed on the LCD screen of AJ-RC10G, and the <MENU ON> button lights up at the same time.
r Scene files
Scene files created on other models cannot be loaded. If you try to load such a file, [NG] is displayed on the LCD of AJ-RC10G.
<REMOTE> terminal
– 184 –
AJ-RC10G
Advertisement
Table of Contents
