Advertisement
Contents
Connections
o Notifications
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
Notification Alerts
On
(Default):
Off:
0 Press INFO on the remote control unit to display current source name, volume,
sound mode name, and other information at the bottom of the screen.
SOURCE
Blu-ray
Dolby Audio - Dolby TrueHD
SOUND
Dolby Audio - Dolby TrueHD
SIGNAL
AUDYSSEY
MultEQ XT32 : Reference
Dynamic EQ : On
Dynamic Volume : Medium
INPUT SIGNAL
FHL
LFE
EXT
FWL
FL
C
FR
SL
SR
SBL
SB
SBR
Front panel
Display
Playback
Notification messages are displayed.
Notification messages are not displayed.
ACTIVE SPEAKERS
FHR
SW
FWR
FL
C
FR
SL
SR
SBL
SBR
50.0
Rear panel
Settings
Remote ID
Set when you operate another Denon AV amplifier with the remote control
unit of this unit. Match the remote control unit you are using with the
remote ID of this unit.
o Settings
1
Press ZONE SELECT to switch the zone mode.
The J indicator lights.
2
Press SETUP.
The menu is displayed on the TV screen.
3
Use ui to select "General", then press ENTER.
4
Use ui to select "Remote ID", then press ENTER.
5
Change the ID for the remote control unit. (v p. 298)
6
Press ENTER.
The Remote ID for this unit is set to the same ID as the one for the
remote control unit.
280
Remote
Tips
Appendix
Index
Advertisement
