Advertisement
Contents
Connections
o Center Spread
Center Spread expands the center channel signal to left and right front
speakers to create a wider frontal audio image for the listener. It is
optimized and designed primary for playback of stereo music content.
On:
Off
(Default):
0 You can set this when sound mode is "Dolby Surround".
0 This feature will be supported via firmware update.
Front panel
Display
Playback
Use "Center Spread".
Do not use "Center Spread".
Rear panel
Settings
o Speaker Virtualizer
The Speaker Virtualizer enhances the surround and height speaker
channels to create an enveloping virtual surround effect.
On
(Default):
Off:
0 You can set this when the sound mode is "Dolby Atmos", "Dolby Surround" or
sound mode that has "+Dolby Surround" in the sound mode name.
0 Usable when not using height, ceiling or "Dolby Atmos Enabled" speakers, or
when not using surround speakers.
0 Audio is not output from the surround back speaker if "Speaker Virtualizer" is
set to "On" when "Speaker Config." - "Surr. Back" is set to "1 spkr" in the menu.
0 Audio is not output from the front wide speaker if "Speaker Virtualizer" is set to
"On".
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X" or "DTS:X MSTR".
193
Remote
Tips
Appendix
Enables "Speaker Virtualizer".
Disables "Speaker Virtualizer".
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Index
Advertisement
