Advertisement
Contents
Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
If you enable new speakers in the speaker configuration menu after
0
performing Audyssey
®
Setup, you will no longer be able to select
Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
Dynamic Volume
®
. (v p. 201)
Changing the following settings:
0
Speaker size (Large or Small) / Distances / Levels / Crossovers settings
will not disable Audyssey
®
or require running Audyssey
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel
Display
Playback
Settings
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
®
or Audyssey
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
®
Setup again.
13.1ch:
11.1ch + ZONE2
(Default):
237
Rear panel
Tips
Settings to assign all power amplifier
0
within this unit to MAIN ZONE to play
back up to 13.1-channels.
You can connect speakers for up to 15.1-
0
channels for MAIN ZONE.
The speaker output automatically switches
for playing back up to 13.1-channels in
accordance with the input signal and sound
mode when 15.1-channel speakers are
installed.
Setting to assign the power amplifiers in
0
this unit for ZONE2 to 2-channels.
You can connect speakers for up to 11.1-
0
channels for MAIN ZONE.
Remote
Index
Appendix
Advertisement
