Advertisement
Contents
Connections
Input Select
Set the audio input mode of each input source.
The input modes available for selection may vary depending on the input
source.
0 "Input Select" settings are stored for each input source.
o Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to "Auto".
Auto
(Default):
HDMI:
Digital:
Analog:
7.1CH IN:
Front panel
Display
Playback
Automatically detect input signal and
perform playback.
Play only signals from HDMI input.
Play only signals from digital audio input.
Play only signals from analog audio input.
Only signals input from the 7.1CH IN
connector will be played back.
Rear panel
Settings
0 When digital signals are properly input, the ~ indicator lights on the display.
If the ~ indicator does not light, check "Input Assign" and the connections.
(v p. 221)
0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR 1 connectors, the input mode whose input
source is "TV Audio" is fixed to ARC.
0 When an eARC function-compatible television is connected to the HDMI
MONITOR 1 connector, the input mode is fixed to eARC while the input
source is "TV Audio".
0 The sound mode cannot be set if the input mode is set to "7.1CH IN".
225
Remote
Tips
Appendix
Index
Advertisement
