Advertisement
Contents
Connections
Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to I can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2 and
ZONE3.
A Input source (v p. 104)
B Volume (v p. 105)
C Sound mode (v p. 150)
D Audyssey (Audyssey MultEQ
Audyssey Dynamic Volume
E "Restorer" (v p. 198)
F "Adjusting the volume of each channel to match the input source
(Channel Level Adjust)" (v p. 145)
G "Displaying your desired video during audio playback (Video
Select)" (v p. 147)
H "Adjusting the picture quality for your viewing environment
(Picture Mode)" (v p. 148)
I "HDMI Video Output" (v p. 213)
0 Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0 Tuner / Internet Radio Station
Front panel
Display
Playback
XT32, Audyssey Dynamic EQ
®
, Audyssey LFC™) (v p. 201)
®
Rear panel
Settings
2
Press ZONE SELECT to select the operating zone with
the remote control.
The J, K or L indicator lights.
3
Press and hold the desired QUICK SELECT until
"Quickz Memory", "Z2 Quickz Memory" or "Z3 Quickz
Memory" appears on the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
,
®
o Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see "Quick Select Names".
(v p. 274)
172
Remote
Tips
Appendix
Index
Advertisement
