How To Change The Shape Of The Own Ship Mark - Furuno FAR-2228-BB Operator's Manual

5. VIDEO PLOTTER OPERATION
5.6

How to Change the Shape of the Own Ship Mark

Ten locations on the own ship mark (section 1.43.4) can be adjusted to depict the
shape of own ship more realistically. The ten points are as shown below.
1. Referring to section 5.2, set [3 MARK TYPE] to [OWN SHIP SHAPE].
2. Put the cursor in the [MARK] box at the bottom of the screen.
3. Spin the scrollwheel to select the point no. to change.
The cursor movies to the selected point position.
4. Use the trackball to move the point to the position desired, then click.
Point position information appears in the [MARK] box, as shown in the figure be-
low.
Distance from own
ship to point
5. Repeat steps 3 to 4 to adjust other points.
5-10
01
10 02
09 03
08 04
07 05
06
MARK
Distance from port side
of own ship to point