How To Toggle Control Of Each Dual Radar Display - Furuno FAR-2228-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.58.1

How to toggle control of each dual radar display

Note: Dual radar mode must be enabled and both radars must be turned on.
You can switch between radars to control either your own, or the external radar from
the antenna box. Left-click to toggle control.
Place the cursor on the [CONTROL] box, then left-click. The indication toggles be-
tween "M" (Master) and "S" (Slave) to show the level of control you have for the radar
you are currently controlling.
The radar numbers for
"Own" and "External"
radars appear here. The
currently controlled radar's
number appears to the left.
There can be only one Master radar at any time. If the radar in operation is set to Slave
and the operator switches to Master, the other radar is automatically changed to
Slave.
Depending on your level of control, available operations are as follows:
Radar Functions
AIS function
Brilliance
Echo trails
EBL
Lat/long data
Presentation mode
Speed data
Target alarm
TT, AIS on/off
TT, AIS track interval
Vector mode
Vector time
VRM
Wiper
Zoom
TT COLLISION
alarm
Range**
A/C SEA
A/C RAIN
Automatic Clutter
Elimination (ACE)
Gain adjustment
Echo stretch
Echo averaging
Picture setting
(Customize echo)
STBY/TX
TT/AIS AZ
1-108
Control Master
Independent Desired value can
be set
Click the box to
toggle the level of
control of the radars.
"M": Main (Master);
"S": Sub (Slave)
Slave
Desired value can be set