Furuno FAR-2228-BB Operator's Manual page 106

1. OPERATIONAL OVERVIEW
5. Select the appropriate item to adjust.
Page 1
[2 ECHO COLOR]
[3 PALETTE]
[4 CONTROL PANEL]
[5 CHARACTERS]
[6 CURSOR]
[7 ECHOES]
[8 TRAILS]
[9 HL]
Page 2
[2 RANGE RINGS]
[3 BEARING CURSOR] Adjusts bearing cursor brilliance.
[4 EBL]
[5 VRM]
[6 PI LINES]
[7 TT SYMBOLS]
[8 AIS SYMBOLS]
[9 L/L GRID]
Page 3
[2 MARKS]
[3 CHART]
6. Spin the scrollwheel, or press the appropriate menu number to change or adjust
the settings, then left-click, or press the ENTER MARK key to confirm the setting.
7. Close the menu.
1-84
Menu item
Changes the color used to display echoes. The avail-
able colors are: [YEL] (yellow), [GRN] (green), [WHT]
(white), [AMB]* (amber), [M-GRN]* (mutli-green), [M-
CYA]* (multi-cyan).
*: Shown for B/W-types only.
If you select [M-GRN] or [M-CYA], the echo color chang-
es depending on the echo strength.
• [M-GRN]: red for strong echoes, ranging through to
green for weak echoes.
• [M-CYA]: red for strong echoes, ranging through to
green for weak echoes.
Changes the color scheme (see subsection 1.45.3).
Adjusts control panel back-light brilliance.
Adjusts on-screen text brilliance.
Adjusts cursor brilliance.
Adjusts the echo brilliance.
Adjusts echo trail brilliance.
Adjusts heading line brilliance.
Adjusts range ring brilliance.
Adjusts EBL line brilliance.
Adjusts VRM line brilliance.
Adjusts PI line brilliance.
Adjusts target trail symbol brilliance.
Adjusts AIS symbol brilliance.
Adjusts latitude/longitude grid brilliance.
Adjusts latitude/longitude grid brilliance.
Adjusts chart brilliance. (Appears only for A/B/W-types
with Radar Plotter functionality.)
Description