Furuno FAR-2228-BB Operator's Manual page 293

FURUNO
Multicast address
Destination port
Re-transmittable binary image transfer
Multicast address
Destination port
Other network function excepted IEC61162-450
5.4 Output port on antenna unit
Sub display (for radar)
6 POWER SUPPLY
6.1 Processor unit (w/ antenna and transceiver unit)
FAR-2218/2318
FAR-2228/2328
FAR-2228-NXT/2328-NXT
FAR-2328W
FAR-2238S/2338S/2338SW 100-230 VAC: 3.2-1.5 (5.6-2.5) A, 1 phase, 50-60 Hz
FAR-2238S-NXT/2338S-NXT 100-230 VAC: 2.6-1.2 (5.1-2.2) A, 1 phase, 50-60 Hz
6.2 Monitor unit
MU-190
MU-231
MU-270W
6.3 HUB (option)
6.4 De-icer (option)
7 ENVIRONMENTAL CONDITIONS
7.1 Ambient temperature
Antenna unit
Indoor units
7.2 Relative humidity
7.3 Degree of protection
Antenna unit
Processor/ monitor unit IP22
Transceiver/ control unit IP20
HUB
7.4 Vibration
8 UNIT COLOR
8.1 Antenna unit
8.2 Processor/ transceiver unit
8.3 Control/ monitor unit
8.4 HUB
8.5 Radar console
239.192.0.1 to 239.192.0.16
60001 to 60016
239.192.0.26 to 239.192.0.30
60026 to 60030
SNMP, HTTP, Syslog, Furuno Management Protocol (FMP)
1 port: HD, BP, Trigger and Video signal
100-230 VAC: 2.1-1.0 (2.9-1.3) A, 1 phase, 50-60 Hz or
24 VDC (21.6-31.2V): 5.4 A (9.0 A)
100-230 VAC: 2.3-1.1 (3.2-1.4) A, 1 phase, 50-60 Hz or
24 VDC (21.6-31.2V): 8.9 A (12.4 A)
100-230 VAC: 2.1-1.1 (2.9-1.3) A, 1 phase, 50-60 Hz
100-230 VAC: 2.3-1.1 (3.2-1.4) A, 1 phase, 50-60 Hz
( ): 42 rpm
100-230 VAC: 0.7-0.4 A, 1 phase, 50-60 Hz
100-230 VAC: 1.0-0.6 A, 1 phase, 50-60 Hz
100-230 VAC: 0.7-0.4 A, 1 phase, 50-60 Hz
100-230 VAC: 0.1 A max. 1 phase, 50/60 Hz
100-115/220-230 VAC: 2.6/1.3 A, 1 phase, 50-60 Hz
-25°C to +55°C (storage: -25°C to +70°C)
-15°C to +55°C (storage: -20°C to +70°C)
93% or less at +40°C
IP56
IP20 (HUB-100), IP22 (HUB-3000)
IEC 60945 Ed.4
N9.5
N2.5
N2.5
N3.0 (HUB-100), N2.5 (HUB-3000)
2.5GY5/1.5 (standard), 7.5BG7/2, 2.5G7/2, N7.5
SP - 4
FAR-2xx8 SERIES
E3652S01M-M
191226