Table of Contents
Advertisement
Generic IO Device DTM
Configuration and
Description item
General sub-item
In general, the Configuration User Interface for the Generic IO Device DTM
contains two items. The upper part always displays the IO Device and Vendor
name plus the Device ID and Vendor ID.
The main and sub-items are:
1 Configuration item with the following two sub-items:
•
General, showing only general information.
•
Modules, displaying the module selected in the IO Device from where
the IO Device can be configured.
2 Description item, showing information about the IO Device, with the
following sub-items:
•
Device Info, showing information of the device.
•
Module Info, displaying information about the modules selected for the
device.
•
GSDML viewer, displaying the content of the GSDML file. Note that the
contents of a GSDML file are XML based.
The General sub-item shows information the IO Controller DTM assigns to the
IO Device at startup of PROFINET IO communication, such as the PROFINET
IO Name and IP Address.
Figure 4.15: Generic IO Device
Section 4-4
57
Advertisement
Table of Contents
Troubleshooting
