Installing and Setting up the Machine > Installing Software
Installing Software in Windows
Express Install
The following procedure is an example for installing the software in Windows 10 using [Express Install].
For details on Custom Installation, refer to the following:
Custom Install (page 2-50)
1
2
3
Insert the DVD.
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
Display the screen.
1
After clicking [Accept] in the license dialog box, depending on your region, a message about
resource and energy conservation may appear. Read the message and click [OK].
After installation is successful, "Set Duplex as default" appears and is selected on the Finished
page. The driver is set to duplex mode by default.
Select [Express Install].
1 Click [View License Agreement]
and read the License Agreement.
2 Click [Accept].
2
2-48