Activating Applications - Kyocera TASKalfa 8353ci Operation Manual

Hide thumbs Also See for TASKalfa 8353ci:

Table of Contents

Operation on the Machine > Application

Activating Applications

Select [Yes].

Installation of the application begins. Depending on the application being installed, the

installation may take some time.

Once the installation ends, the original screen reappears.

• To install another application, repeat steps 2-3 and 2-4.

• To remove the USB drive, select [Remove USB Drive] and wait until the message

"USB Drive can be safely removed." appears. Then remove the USB drive.

Display the screen.

[System Menu/Counter] key > [Application]

If the user authentication screen appears, enter your login user name and login password

and select [Login]. For this, you need to login as an administrator or as a user with

privileges to carry out this setting. The factory default login user name and login password

are set as shown below.

TASKalfa 7353ci

TASKalfa 8353ci

Activate the application.

Select the desired application > [Activate]

You can view detailed information on the selected application by selecting [Detail].

Enter the license key > [Official]

Some applications do not require you to enter a license key. If the license key entry screen

does not appear, go to step 3-3. To use the application as a trial, select [Trial] without

entering the license key.

Select [Yes].

• If you change the date/time while using the trial version of an application, you

will no longer be able to use the application.

• Icons of activated application are displayed in the Home screen.

Select the application icon in the Home screen.

Select the application icon.

The application will start up.

Taskalfa 7353ci