Kyocera TASKalfa 8353ci Operation Manual page 568

Troubleshooting > Troubleshooting
B
Message
Box is not found.
Box limit exceeded.
Broadcast error
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-79)
C
Message
Calibrating...
Cannot Banner Print.
Cannot connect to
Authentication
*1
Server.
Cannot connect to
Server.
Cannot connect.
Checkpoints
—
*1
Is [End] displayed on the
screen?
—
—
Checkpoints
―
―
—
—
—
—
—
—
Corrective Actions
The specified box cannot be
found. Job is canceled. Select
[End].
The specified box is full, and no
further storage is available. Job
is canceled. Select [End]. Try to
perform the job again after
printing or deleting data from the
box.
Repeat Copy box is full, and no
further repeat copy is available.
Select [Continue] to print
scanned pages. Select [Cancel]
to cancel the job.
An error has occurred during
broadcast transmission. The job
is canceled. Select [End].
Corrective Actions
The machine is under the
adjustment to maintain its
quality. Please wait.
System stamp is set up.
Banner print cannot be carried
out.
Job is canceled. Select [End].
Set machine time to match the
server's time.
Check the domain name.
Check the host name.
Check the connection status
with the server.
Check the connection status
with the server.
This appears when the Wi-Fi or
Wi-Fi Direct connection did not
complete. Check the settings,
and check the signal conditions.
10-35
Reference
Page
—
—
—
—
Reference
Page
―
―
page 2-31
page 9-2
page 9-2
—
—
page 8-53
page 8-54