Kyocera TASKalfa 8353ci Operation Manual page 557

Troubleshooting > Troubleshooting
Symptom
Paper often jams.
2 or more sheets are
overlaps when ejected.
(multi feed)
Printouts are wrinkled.
Printouts are curled.
Printer driver cannot be
installed.
Checkpoints
Is the paper loaded correctly?
―
Is the paper of the supported type?
Is it in good condition?
Is the paper curled, folded or
wrinkled?
Are there any loose scraps or
jammed paper in the machine?
―
Is the paper loaded correctly?
―
―
Is the paper damp?
―
Is the paper damp?
Is the driver installed with the host
name while Wi-Fi or Wi-Fi Direct
function is available?
Corrective Actions
Load the paper correctly.
Turn the orientation 180 degrees
around in which the paper is
positioned.
Remove the paper, turn it over, and
reload it.
Replace the paper with new paper.
Remove any jammed paper.
Load the paper correctly.
Load the paper correctly.
Turn the orientation 180 degrees
around in which the paper is
positioned.
Clean the paper separator.
Replace the paper with new paper.
Turn the orientation 180 degrees
around in which the paper is
positioned.
Replace the paper with new paper.
Specify the IP address instead of
the host name.
10-24
Reference
Page
page 3-4
page 3-4
page 3-4
page 3-4
page 10-61
page 3-2
page 3-4
page 3-4
page 10-4
page 3-4
page 3-4
page 3-4
page 2-49