Table of Contents
Advertisement
Status/Job Cancel > Device/Communication
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status.
1
2
Display the screen.
1
Select the [Status/Job Cancel] key.
2
Select [Device/Communicate].
The screen to check the status or configure the devices is displayed.
Check the status.
The items you can check are described below.
"Scanner"
The status of an original scanning or the error information (paper jam, opened cover, etc.) is
displayed.
"Printer"
Error information such as paper jam, or out of toner, and status such as waiting or printing are
displayed.
"FAX Port 1", "FAX Port 2", "i-FAX", "FAX Memory RX Box"
•
The information such as sending/receiving and dialing is displayed.
FAX Operation Guide
"USB Drive"
•
The usage and capacity of the USB drive connected to this machine are displayed.
•
Select [Format] to format USB drive.
IMPORTANT
When [Format] is selected, all data in the USB drive is erased.
•
Select [Remove] to safely remove the USB drive.
"Hard Disk"
The status of the hard disk is displayed.
"Connectivity"
The network connection status and the status of the optional keyboard are displayed.
7-13
Advertisement
Table of Contents
Troubleshooting
