To Start And Stop Forced Cooling - Daikin Altherma EDLQ011-016CW1 Installer's Reference Manual

b
c
a
d
e
d
a Gas stop valve
b Closing direction
c Hexagonal wrench
d Valve cap
e Liquid stop valve
13.3

To start and stop forced cooling

Confirm that DIP switch SW2 is in COOL mode.
1 Press the forced cooling operation switch SW1 to begin forced
cooling.
2 Press the forced cooling operation switch SW1 to stop forced
cooling.
COOL
HEAT
NOTICE
Take care that while running forced cooling operation, the
water temperature remains
temperature read out of the indoor unit). You can achieve
this, for example, by activating all fans of the fan coil units.
EBLQ+EDLQ011~016CAV3+W1 + EK(2)CB07CAV3 +
EKMBUHCA3V3+9W1
Daikin Altherma low temperature monobloc
4P522034-1 – 2018.01
higher than 5°C (see
13 Disposal
Installer reference guide
89