Wall Mounting - BellSouth FILTERED SOUND MH9910V4 Owner's Manual

Wall Mounting

Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT
TELEPHONE LINE CORD to the telephone line jack.
2. Insert the top hooks of the MOUNTING BRACKET into the matching slots
of the BASE UNIT (as shown below). Then push the bottom hooks of the
MOUNTING BRACKET into place. Plug the free end of the SHORT
TELEPHONE LINE CORD into the MODULAR WALL JACK.
3. Align the upper keyhole on the MOUNTING BRACKET with the upper
STUD of the wall plate, so that the opening end of the MOUNTING
BRACKET matches the lower stud, then pull the BASE UNIT down until
securely seated.
SHORT TELEPHONE
MOUNTING
BRACKET
WALL PLATE
STUD
WALL
PLATE
LINE CORD
13
TELEPHONE
LINE JACK
BASE UNIT