BellSouth FILTERED SOUND MH9910V4 Owner's Manual page 34

Problem Solving
Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object.
Raise
the ANTENNA.
If after pressing the TALK button, you receive three beeps and no dial
tone, check the following:
1. Reset the HANDSET by placing it on the BASE UNIT for 2 to 5 seconds.
NOTE: If no telephones in the house
are working, disconnect one set at a time to
verify that none of the phones are causing the
problem. If you still have a problem after doing
this and your telephone still does not work,
please contact your local phone company.
IMPORTANT
When you hear interference,
press the SCAN button to change
the operating channel.
34